text.skipToContent text.skipToNavigation

Chemicals

From flux removal to paint application, from lubricating to priming, from hand cleaning to oven cleaning, EIS offers the chemicals you require to get the job done. Specialty chemicals are also available, covering a range of specific applications across a variety of markets.

  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 198 products found
  • ITW Chemtronics ES1020 Ultrajet® Duster, 10 oz Aerosol Can, Colorless, 12/Case

    ID: CHEES1020
    Mfr ID: ES1020
    Ultrajet compressed gas duster is a high pressure duster that cleans electronics without scratching delicate surfaces. This duster/ cleaner is nonflammable, residue-free and won’t scratch delicate surfaces.

    In Stock

  • Dow Corning Disinfectant Cleaner with Scrubbing Bubbles, 25 oz Can

    ID: DOWBATHCLEANER
    Mfr ID: DOWBATHCLEANER
    Dow Corning Disinfectant Cleaner with Scrubbing Bubbles.

    In Stock

  • Sprayon S00703000 Electrical Degreaser, 19 oz Aerosol Can, Clear

    ID: S00703-SHE
    Mfr ID: S00703000
    Sprayon EL703 Electric Motor Degreaser Aerosol instantly penetrates and removes dirt, oil, grease, wax and moisture from electrical equipment and machinery. Formulated to clean/degrease electrical equipment when electrical current exists or when there is a residual electrical potential from a component, such as a capacitor.

    In Stock

  • ITW Chemtronics ES1052 Freeze Spray, 10 oz Aerosol Can, Colorless, 12/Case

    ID: ES1052
    Mfr ID: ES1052
    Freeze Spray is engineered for locating thermal intermittent electrical components and cooling printed circuit boards. This circuit refrigerant system is non-flammable, residue-free and provides fast cooling action.

    In Stock

  • ITW Chemtronics Electro-Wash® PX Cleaner and Degreaser

    Multiple item options available
    Mfr ID: ES1-CD
    Electro-Wash PX is a fast drying, one step precision cleaning and degreasing agent safe for most plastics. Engineered with very low surface tension, this high pressure aerosol formulation flushes areas clean and evaporates instantly leaving no residue.

    In Stock

  • ITW Chemtronics Flux-Off® Heavy Duty Flux Remover

    Multiple item options available
    Mfr ID: ES131
    Flux-Off heavy duty flux remover is an excellent cleaner for the removal of all rosin and no clean flux types from electronic subassemblies, printed circuit boards and all other electronic components.

     

  • ITW Chemtronics Freez-It® Anti-Static Freeze Spray

    Multiple item options available
    Mfr ID: Freez-It-AS
    Freez-It anti-stat is engineered for locating thermal intermittent electrical components or cooling printed circuit boards with minimal static generation. This circuit refrigerant system is non-flammable, residue-free and provides fast cooling action.

     

  • ITW Chemtronics ES1020R Ultrajet® Duster Refill, 10 oz Aerosol Can, Colorless, 12/Case

    ID: CHEES1020R
    Mfr ID: ES1020R
    ITW Chemtronics Ultrajet Duster Refill.

     

  • Sprayon S20848000 Flash Free® Electrical Degreaser, 20 oz Aerosol Can, Clear

    ID: S20848-SHE
    Mfr ID: S20848000
    Sprayon EL848 electrical degreaser (flash free) aerosol is a non-flammable, fast-evaporating cleaner that penetrates instantly to remove dirt, oil, grease and wax. Increases the life of electrical components by removing foreign materials that can cause costly downtime. Replaces 1,1,1 Trichloroethylene. Degreases more thoroughly and several times faster than alkaline cleaners.

    In Stock

  • ITW Chemtronics Flux-Off® Lead-Free Flux Remover

    Multiple item options available
    Mfr ID: Flux-Off-Lead
    Flux-Off lead-free flux remover is an extra strength solvent that removes heavy and encrusted flux deposits resulting from high temperature lead-free soldering applications. This powerful cleaner quickly removes all types of flux, oxide particles, dust, grease and oil, and then evaporates quickly leaving no residues.

    In Stock

  • JNJ Industries GA6SMT GlobalTech® SMT Stencil Cleaner, 1 gal Bottle, Clear

    ID: GA6SMT
    Mfr ID: GA6SMT
    A fast drying odor free solvent, GlobalTech SMT stencil cleaner quickly removes solder paste from stencils, squeegees, printers, tools, machinery and PC boards, leaving no residue. Perfect for both manual and automatic cleaning, this formulation has been approved for use by DEK in the solvent bar system for their automatic stencil wiper assembly.

     

  • HY-SOLV Solvent Degreaser and Spot Cleaner, 20 oz Aerosol Can

    ID: HY-SOLV
    Mfr ID: HY-SOLV
    HY-SOLV Solvent Degreaser and Spot Cleaner.

     

  • Micro Care FRZA Freeze™ Anti-Static Circuit Chiller, 10 oz Aerosol Can, Colorless, 12/Case

    ID: MCC-FRZA
    Mfr ID: FRZA
    Mfr: MicroCare
    The MicroCare anti-static general purpose circuit chiller deliver instant chilling for low temperature testing. Use to locate thermal intermittent flaws in electronics or as a heat sink for sensitive components during hand soldering.

     

  • LPS 00916 Electro 140® Contact Cleaner, 11 oz Aerosol Can, Clear

    ID: 00916-LPS
    Mfr ID: 00916
    Non-conductive contact cleaner leaves no residue with controlled evaporation and superior wetting and penetrating action safe on plastics. cleaner features a controlled evaporation rate, leaves no residue, nonconductive. Safe to use on plastics.

     

  • CRC 02125 HF™ Contact Cleaner, 16 oz Aerosol Can, Clear

    ID: 02125-CRC
    Mfr ID: 02125
    Mfr: CRC
    HF Contact Cleaner is a high flash (HF) point, zero VOC, petroleum distillate-based precision cleaner that effectively cleans electronics and electrical equipment.

     

  • CRC QD® 21 Contact Cleaner

    Multiple item options available
    Mfr ID: QD21
    Mfr: CRC
    CRC Industries QD 21 electrical contact cleaner features a petroleum distillate/alcohol blend that removes soil and other contaminants from sensitive electronic components. Quick drying, leaves no residue. Contains no Class I or Class II ozone-depleting chemicals. Safe on all plastics. Excellent for lower flashpoint applications.

     

  • LPS 00816 Electra-X Contact Cleaner, 15 oz Aerosol Can, Clear

    ID: 00816-LPS
    Mfr ID: 00816
    An aggressive non-flammable solvent blend for the removal of dirt, moisture, dust, flux and oxides from the internal components of electronic or precision equipment such as circuit boards, and the internal components of electronic devices used in factories and other industrial settings.

     

  • Sprayon S011060401 CD™1106 Non-Ammoniated Glass Cleaner, 1 gal Trigger Spray Refill Bottle, Blue

    ID: 01106-0401-SHE
    Mfr ID: S011060401
    Sprayon CD1106 non-ammoniated glass cleaner bulk is a ready-to-use, pleasantly scented, neutral cleaner, which leaves surfaces sparkling clean without streaks. Serves as re-fill for CD1106 non-ammoniated glass cleaner trigger spray.

     

  • CRC 02064 Cable Clean® Degreaser, 20 oz Aerosol Can, Clear

    ID: 02064-CRC
    Mfr ID: 02064
    Mfr: CRC
    CRC 02064 combines a high-voltage splice and termination cleaner with a nonchlorinated, industrial-strength degreaser. Not subject to the reporting requirements of RCRA.

     

  • CRC CO® Contact Cleaner

    Multiple item options available
    Mfr ID: 020-CO
    Mfr: CRC
    CRC CO contact cleaner, Advanced Technology Formula, is a superior non-flammable, plastic safe, precision cleaner. It does not contain known ozone depleting substances or Volatile organic compounds (VOCs) and minimizes global warming potential to provide an optimal alternative to CFC, HCFC and flammable contact cleaners. Regular use of CO contact cleaner will help prevent electrical failures, increase performance and prolong equipment life by dissolving and rinsing away contaminants. Recommended for the removal of light oils, dust, dirt and fingerprints from electrical connectors, printed circuit boards, relays, switches, scales, timers and other sensitive electrical and electronic equipment.

     

  • CRC 02120 Lectra Clean® II Non-Chlorinated Heavy Duty Degreaser, 20 oz Aerosol Can, Clear/Water-White

    ID: 02120-CRC
    Mfr ID: 02120
    Mfr: CRC
    CRC cleaning degreaser where chlorinated solvents are not acceptable. High flashpoint of 180 deg F. Effectively removes soils with no residue build-up. Use caution on plastics.

     

    • 1(current)
    • 2
    • 3