text.skipToContent text.skipToNavigation

Dow Corning 577 Sylgard® Two-Part Primerless Silicone Adhesive, 0.5kg Kit, Beige/Black

ID: DC577X.5KG Mfr ID: 577-.5KG
Manufactured by: Dow Corning
Dow Corning Sylgard 577 two-part heat cure (addition-curing) adhesives cure rate is rapidly accelerated with heat (see cure schedules in table) and an optimum cure schedule will balance processing performance and costs.

Select by Part Number

OR
Select Options Below
Container Size

USD $70.23 / KT

Check availability 

This item may be sold in units of 6.

  • Brand name :  Dow Corning
  • Trade Name :  Sylgard®
  • Series :  577
  • Item Name :  Silicone Adhesive
  • Short Desc :  ADHESIVE,PRIMERLESS 577 .5KG-KIT
  • UNSPSC :  31201600

For thicker sections or if voiding is observed the use of a 30-minute precure at 158 deg F or the use of an adhesive with low-void technology may reduce voids.

Design & Construction
Cure Type Heat Cure 
Form - Part-A Liquid 
Form - Part-B Liquid 
Color - Part-A Beige 
Color - Part-B Black 
Performance Details
Full Cure Time 60 min at 125 deg C 
Elongation 224% 
Shear Strength 875 psi 
Tensile Strength 988 psi 
Environmental Condition
Temperature Rating -45 to 200 deg C 
Electrical Properties
Dielectric Strength 500V/Mil 
UL Rating UL94 V-0 
Chemical Properties
Composition - Part-A Polydimethylsiloxane 
Specific Gravity - Part-A 1.3 
Viscosity - Part-A 121500 cP 
Supporting Information
Applicable Materials Aluminum 
Physical Properties
Container Size 0.5kg 
Container Type Kit 
Hardness 60 Shore A 
Odor/Scent - Part-A Slight 

Dow Corning 577 Sylgard® Two-Part Primerless Silicone Adhesive, 0.5kg Kit, Beige/Black Technical Data Sheet 

Dow Corning 577 Sylgard® Two-Part Primerless Silicone Adhesive, 0.5kg Kit, Beige/Black Safety Data Sheet (SDS) 

Dow Corning 577 Sylgard® Two-Part Primerless Silicone Adhesive, 0.5kg Kit, Beige/Black Safety Data Sheet (SDS) 

Features :

  • Flowable
  • Heat cure
  • High tensile strength
  • Long working time after mixing
  • Rapid, versatile cure processing controlled by temperature
  • Able to flow, fill or self-leveling after dispensing
  • Long working time reduces need for equipment purging/clean-up
  • Can be considered for uses requiring added flame resistance

Applications :

  • For Sealing Lids and Housings, Attaching Baseplates, Gasketing, Connector Sealing