Elantas PDG ELtherpox™ 44-7001 Single-Component Epoxy Impregnating Resin, 450 lb
MFR #:121142
EIS #:447001DRUM
MFR #:121142
EIS #:447001DRUM
Out of Stock
Min Qty:1
|Qty Increment:1
Elantas PDG ELtherpox™ 44-7001 Single-Component Epoxy Impregnating Resin, Epoxy Base Type, 1.1731 g/cm3 (77 °F (25 °C)) Density, 4900 V/Mil At ASTM D149 - 0.9 Mil, 4200 V/Mil At ASTM D149 - 0.9 Mil (After 24 hr in Water) Dielectric Strength, >93 °C (ASTM D93) Flash Point, 4 - 8 hr At 165 °C/329 °F Full Cure Time, 5 - 11 min At 150 °C (Sunshine) Gel Time, 400 - 850 CP At 25 °C/77 °F Viscosity. - ELtherpox™ 447001 is a single-component, unfilled, medium viscosity epoxy resin.
$33.82 / US pound
Min Qty:1
|Qty Increment:1
Elantas PDG ELtherpox™ 44-7001 Single-Component Epoxy Impregnating Resin, Epoxy Base Type, 1.1731 g/cm3 (77 °F (25 °C)) Density, 4900 V/Mil At ASTM D149 - 0.9 Mil, 4200 V/Mil At ASTM D149 - 0.9 Mil (After 24 hr in Water) Dielectric Strength, >93 °C (ASTM D93) Flash Point, 4 - 8 hr At 165 °C/329 °F Full Cure Time, 5 - 11 min At 150 °C (Sunshine) Gel Time, 400 - 850 CP At 25 °C/77 °F Viscosity. - ELtherpox™ 447001 is a single-component, unfilled, medium viscosity epoxy resin.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy Impregnating Resin
Trade NameELtherpox™
SeriesELtherpox™ 44-7001
General Features
Net Weight9.3 - 9.9 lb/gal
Shelf Life3 Months
TypeSingle-Component
Design & Construction
Base TypeEpoxy
FormLiquid
Performance Details
Full Cure Time4 - 8 hr at 165 °C/329 °F
Gel Time5 min
Technical Details
Flash Point93 °C
Chemical Properties
Viscosity400 cP
Electrical Properties
Dielectric Strength4900 V/mil
Physical Properties
Container Size450 lb
Container TypeDrum
Features
- Excellent bond strength
- Low VOC level
- Chemical-resistant
- Eltherpox™ 447001 cures to a clear, tough, electrically-insulating film
- Dip-and-bake, vacuum-pressure Impregnation application methods
- 77 Pounds at 25 °C / 77 °F, 20 Pounds at 150 °C / 302 °F helical coil bond strength over MW 35
- 80 °C (DSC) glass transition temperature
- 3.4 at 1 kHz - 25 °C, 3.4 at 1 kHz - 50 °C, 3.5 at 1 kHz - 100 °C, 3.9 at 1 kHz - 100 °C dielectric constant
- 0.006 at 1 kHz - 25 °C, 0.006 at 1 kHz - 50 °C, 0.008 at 1 kHz - 100 °C, 0.06 at 1 kHz - 100 °C dissipation factor
- 3 x 10^16 ohm-cm at 25 °C volume resistivity
- Secondary insulation
- Gel Time: 10 - 15 min at 125 °C/257 °F (Sunshine)
- Dielectric Strength: 4900 V/Mil at ASTM D149 - 0.9 Mil, 4200 V/Mil at ASTM D149 - 0.9 Mil (After 24 hr in Water)
- Flash Point: >93 °C (ASTM D93)
- Viscosity: 400 - 850 CP at 25 °C/77 °F
- Density: 1.1731 g/cm3 (77 °F (25 °C))
- Gel Time: 5 - 11 min
- Viscosity: 400 - 850 cP
Applications
- For Impregnation of Form Wound and Random Wound Motor Coils