text.skipToContentdvywebrxdaexsbxaacuerzafvfx text.skipToNavigation

Elantas PDG Pedigree® 6180-S Polyester Impregnating Resin, 9 lb

ID: PDG6180-SG Mfr ID: PDG6180-SG
Manufactured by: ELANTAS PDG, Inc.
Elantas PDG Pedigree® 6180-S Polyester Impregnating Resin, 3400 V/Mil (ASTM D149 - 1.5 Mil) Dielectric Strength, 26 deg C (ASTM D93) Flash Point, 30 min At 82 deg C/180 deg F or 20 min At 93 deg C/200 deg F Full Cure Time, 8 - 15 min At 82 deg C/180 deg F - w/2% C 8 Gel Time, 85 - 90 Shore D Hardness, 150 - 200 CP At 25 deg C/77 deg F Viscosity.

USD $7.82 / LB

Buy more and save

9-116 $7.82 / LB
117-224 $6.59 / LB
225+ $5.69 / LB

Check availability 

This item may be sold in units of 9.

  • Brand name :  Elantas PDG
  • Trade Name :  Pedigree®
  • Series :  Pedigree® 6180-S
  • Item Name :  Polyester Impregnating Resin
  • Short Desc :  6180-S POLYESTER RESIN 9 LBS
  • UNSPSC :  13111003

Pedigree® 6180 S is a 100%-reactive, unsaturated polyester resin in styrene monomer. It requires the addition of a peroxide catalyst for proper cure.

Performance Details
Full Cure Time 30 min at 82 deg C/180 deg F or 20 min at 93 deg C/200 deg F 
Gel Time 8  min
General Features
Shelf Life 2 Months 
Net Weight 9.0 - 9.4 lb/gal 
Environmental Condition
Flash Point 26  deg C
Electrical Properties
Dielectric Strength 3400  V/Mil
Chemical Properties
Viscosity 150  cP
Physical Properties
Hardness 85 - 90 Shore D 
Container Size 9  lb

Elantas PDG Pedigree® 6180-S Polyester Impregnating Resin, 9 lb Brochure 

Features :

  • Chemically promoted for low temperature cure
  • Low viscosity
  • High bond strength at elevated temperature
  • 3 day catalyzed pot life - no need for meter-mix dispensing equipment
  • UL recognized insulation systems up to class 240
  • Trickle, dip-and-bake application methods
  • Secondary insulation
  • Dielectric Strength: 3400 V/Mil (ASTM D149 - 1.5 Mil)
  • Flash Point: 26 deg C (ASTM D93)
  • Viscosity: 150 - 200 CP at 25 deg C/77 deg F
  • Gel Time: 8 - 15 min
  • Viscosity: 150 - 200 cP

Applications :

  • For Impregnation of Motor Windings Including Stators and High-Speed Armatures