text.skipToContent text.skipToNavigation

Superior Essex Soderon® RW29HSCE Heavy Build Round Magnet Wire, 29 AWG, Copper, Red, 6" Spool (PC06)

Manufactured by: Superior Essex
Soderon FS/155 fast solder heavy build round magnet wire is designed to be utilized where the particular coil or component design may utilize the unique solder stripping property. The film lends itself to the precise process control required in manufacturing many electrical/electronic devices.

Select by Part Number

Select Options Below
Wire Size

USD $934.00 / 100 LB

In Stock

This item may be sold in units of 9.

  • Brand name :  Superior Essex
  • Trade Name :  Soderon®
  • Series :  FS155-HB
  • Item Name :  Magnet Wire
  • Short Desc :  H SODERON/FS155 29 RED SX 6"SPL/PC06
  • Packaging :  6" Spool (PC06)
  • UNSPSC :  26121509

Soderon FS/155 heavy build round magnet wire with its improved fast solder polyurethane film, over coated with nylon, surpasses standard Class 130 and 155 in its speed of solderability and can be used in a wide array of wire applications. Exhibits high dielectric strength.


WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Design & Construction
Material Copper 
Color Red 
Insulation Material Polyurethane/Polyamide (Nylon) 
NEMA Rating MW 80-C 
Shape Round 
General Features
Type Heavy Build 
Standards UL Listed, ASTM D2307, IEC 60317-21, RoHS Compliant 
Environmental Condition
Temperature Rating 155  deg C
Physical Properties
Wire Size 29 AWG 
Reel Diameter 3.5  Inch
Reel Weight 8  lb
Reel Width 3.5 Inch Inner x 4.31 Inch Outer 

Superior Essex Soderon® RW29HSCE Heavy Build Round Magnet Wire, 29 AWG, Copper, Red, 6" Spool (PC06) Technical Data Sheet 

Features :

  • Soderon is an excellent choice for automatic winding machines use in coils and small motors
  • Flexibility and adhesion properties of the Soderon FS/155 magnet wire film, because of its tough nylon topcoat, exceeds most winding applications and requirements
  • The solvent resistant properties of Soderon FS/155 are suitable for most classes 105, 130 and 155 varnishes, encapsulants and treating resins
  • Thermoplastic flow (cut-thru) temperature of Soderon 155 magnet wire is in the 237 deg C range, well above maximum process conditions found in molded coil work, trickle impregnation processes and standard preheat varnish cycles specified for normal Class 155 systems

Applications :

  • For Bobbin Wound and Paper Section Coils, Molded and Encapsulated Coils, Small Motors, Armature and Fields, Automotive Coils, Toroidal Coils