MFR #:1720
EIS #:PH13-1720
Series #:1720
MFR #:1720
EIS #:PH13-1720
Series #:1720
Foot grounders provide a continuous ground path between an operator and a properly grounded ESD protected flooring. These foot grounders are designed for use on standard shoes. They can be easily adjusted to fit most individuals. Desco's foot grounders have a lining that prevents carbon marks on shoes. Foot grounder models have discrete resistors built into the contact strip. The product has been tested to ESD STM97.2 - floor materials and footwear voltage measurement in combination with a person. It is a suitable ESD footwear component in flooring - footwear system when used as the primary grounding method (< 3.5 x 10^7 ohm per ESD STM 97.1 floor materials and footwear-resistance measurement in combination with a person). - Hook and loop stretch hook and loop fastening system. Size adjustable material expands to fit most shoe sizes comfortably and flex during walking. Tear resistant rubber with inner scrim. Reinforced material prevents tearing - increasing the service life of foot grounder. 30 Inch long, 8 conductive strand nylon polyester grounding tab. Additional conductive material provides reliable connection with operator's sweat-layer. Non-marring interior layer will not mar operator's shoes. Date coded. Provides lot traceability to ensure quality control and tracking information.
$15.33
- $21.90
Select from the options below
Foot grounders provide a continuous ground path between an operator and a properly grounded ESD protected flooring. These foot grounders are designed for use on standard shoes. They can be easily adjusted to fit most individuals. Desco's foot grounders have a lining that prevents carbon marks on shoes. Foot grounder models have discrete resistors built into the contact strip. The product has been tested to ESD STM97.2 - floor materials and footwear voltage measurement in combination with a person. It is a suitable ESD footwear component in flooring - footwear system when used as the primary grounding method (< 3.5 x 10^7 ohm per ESD STM 97.1 floor materials and footwear-resistance measurement in combination with a person). - Hook and loop stretch hook and loop fastening system. Size adjustable material expands to fit most shoe sizes comfortably and flex during walking. Tear resistant rubber with inner scrim. Reinforced material prevents tearing - increasing the service life of foot grounder. 30 Inch long, 8 conductive strand nylon polyester grounding tab. Additional conductive material provides reliable connection with operator's sweat-layer. Non-marring interior layer will not mar operator's shoes. Date coded. Provides lot traceability to ensure quality control and tracking information.
Product Options
Showing 1 out of 1 options
Resistor: 1 Mohm | EIS Part #: 17200-DES | $ / each |
- Attributes
- Features
Attributes
General Information
Item NameFoot Heel Grounder
Series1720
General Features
StandardsESD SP9.2, TR53, STM97.2, STM 97.1, UL Listed
Design & Construction
ColorBlack/Blue
MaterialNylon Polyester Tab
Closure TypeHook and Loop
Electrical Properties
Resistance10^6 - 10^7 ohm (Tab to Cup)
Physical Properties
Length30 Inch
Width0.375 Inch
Features
- 0.06 Inch thick, 2-layer laminated rubber sole. Inner layer is insulative neoprene, and outer black layer is conductive neoprene. Tear resistant nylon reinforced 4.3 oz, inner scrim layer prevents the rubber from tearing
- 3/8 Inch wide, 30 Inch long blue nylon ribbon contains 8 electrically conductive carbon suffused fibers, reversible, may be positioned on either side of foot
- 3/4 Inch wide blue non-elastic hook material
- 3/4 Inch wide blue stretch loop material, for quick and easy attachment to foot
- 10^6 - 10^7 ohm resistance to ground
- 30 Inch tab length
- 0.375 Inch tab width