text.skipToContent text.skipToNavigation

Von Roll/John C Dolph Dolphon® CB-1128 Two-Part Flexible Motor Compound, 2 lb, Black

ID: DOLCB11282LB Mfr ID: DOLCB11282LB
Manufactured by: Von Roll / John C Dolph
Von Roll/John C Dolph Dolphon® CB-1128 Two-Part Flexible Motor Compound, Room Temperature Cure Type, 8.8 - 9.0 lb/gal At 77 deg F (25 deg C) Density, 665 V/Mil Dielectric Strength, 2 - 4 hr At 77 deg F Full Cure Time, 45 Shore A At 70 deg F Hardness, 100:6 By Weight Mixing Ratio, 130 deg C Temperature Rating, 1260 psi Tensile Strength, 12.2 x 10^-4 Cal/sec/cm^2/deg C/cm Thermal Conductivity, 100000 cps At 80 deg F, 10 rpm Viscosity.

Select by Part Number

OR
Select Options Below
Container Size

USD $113.47 / KT

Buy more and save

2-5 $94.10 / KT
6-9 $75.65 / KT
10+ $68.89 / KT

In Stock

This item may be sold in units of 1.

  • Brand name :  Von Roll John C Dolph
  • Trade Name :  Dolphon®
  • Series :  Dolphon® CB-1128
  • Item Name :  Flexible Motor Compound
  • Short Desc :  REACTOR,CB-1128 POLYBUDIENE 2-LB KIT BLK
  • UNSPSC :  13101719

CB-1128 is a unique, two part resin formulated for motor and generator encapsulation. It is available in pre-packaged kits and bulk.

Performance Details
Full Cure Time 2 - 4 hr at 77 deg F 
Tensile Strength 1260  psi
Design & Construction
Color Black 
Form Liquid 
Cure Type Room Temperature 
General Features
Type Two-Part 
Environmental Condition
Temperature Rating 130  deg C
Electrical Properties
Dielectric Strength 665  V/Mil
Chemical Properties
Viscosity 100000  cP
Mixing Ratio 100:6 By Weight 
Physical Properties
Hardness 45 Shore A at 70 deg F 
Container Size 2  lb

Von Roll/John C Dolph Dolphon® CB-1128 Two-Part Flexible Motor Compound, 2 lb, Black Specification Sheet 

Von Roll/John C Dolph Dolphon® CB-1128 Two-Part Flexible Motor Compound, 2 lb, Black Safety Data Sheet (SDS) 

Von Roll/John C Dolph Dolphon® CB-1128 Two-Part Flexible Motor Compound, 2 lb, Black Safety Data Sheet (SDS) 

Features :

  • Excellent impact and abrasion resistance
  • Excellent thermal conductivity
  • Superior water, moisture and chemical resistance
  • Flexible over wide temperature ranges (65 to 155 deg C)
  • Brush or spray applications
  • Withstands thermal shock
  • Forms protective seal coat
  • Tough and flexible
  • Works well in harsh environments
  • Excellent resistance to chemical attack
  • Crack resistant, Salt resistant
  • 3.06 x 10^14 Ohms surface resistivity
  • 1.78 x 10^15 Ohm-cm volume resistivity
  • 0.01% (ASTM D-570-59aT) water absorption
  • Viscosity: 100000 cps at 80 deg F, 10 rpm
  • Density: 8.8 - 9.0 lb/gal at 77 deg F (25 deg C)
  • Thermal Conductivity: 12.2 x 10^-4 Cal/sec/cm^2/deg C/cm

Applications :

  • Sand Pits
  • Stone Quarries
  • Cement Plants
  • Meat Packing Plants
  • Canneries
  • Poultry Processing Plants
  • Dairies
  • Breweries
  • Telecommunications
  • Wood Pulp Plants
  • Paper Mills
  • Textile Mills
  • Dyeing Plants
  • Wind Mills
  • Automotive (On and Off-Road) Applications
  • Marine Applications