Dow 1-2577 Low VOC One-Part Conformal Coating
MFR #:1-2577 Low VOC
EIS #:PH11-1-2577-LV
MFR #:1-2577 Low VOC
EIS #:PH11-1-2577-LV
Dow Corning brand RTV conformal coatings have firm, dry surfaces for better handling and abrasion resistance after cure. Various viscosity versions facilitate different application methods. They require atmospheric moisture to cure (no ovens) and their cure rates can be accelerated by mild heat. - They are supplied in solvent, with low-VOC versions available and have Mil spec, IPC-CC-830 and UL recognition. Conformal coatings are materials applied in thin layers onto printed circuits or other electronic substrates.
$587.80
Select from the options below
Dow Corning brand RTV conformal coatings have firm, dry surfaces for better handling and abrasion resistance after cure. Various viscosity versions facilitate different application methods. They require atmospheric moisture to cure (no ovens) and their cure rates can be accelerated by mild heat. - They are supplied in solvent, with low-VOC versions available and have Mil spec, IPC-CC-830 and UL recognition. Conformal coatings are materials applied in thin layers onto printed circuits or other electronic substrates.
Product Options
Showing 1 out of 1 options
 | Container Size: 3.4kg | EIS Part #: DC1-2577X3.4KG | $ / Pail Pack: 1/Carton |
- Attributes
- Features
Attributes
General Information
Item NameConformal Coating
Series1-2577
General Features
Shelf Life36 Months
StandardsWEEE/RoHS Compliant, MIL-I-46058C Certified
Storage Temperature32 °C
TypeOne-Part
Design & Construction
ColorYellow
Cure TypeRTV/Heat Cure
FormLiquid
Performance Details
Application Time7 min
Full Cure Time72 hr
Chemical Properties
CompositionSilicone Resin
Specific Gravity1.04
Viscosity950 cP
Electrical Properties
Dielectric Strength400V/Mil
UL RatingUL746 E, UL94 V-0
Physical Properties
Hardness80 Shore A
Odor/ScentStrong
Environmental Condition
Temperature Rating-45 to 200 °C
Features
- Cures to a tough, elastoplastic, resilient and abrasion resistant surface
- Solvent-borne resin coating
- Room temperature cure with optional heat acceleration after solvent flash-off
- UV indicator for inspection
- UL V-0 flammability rating
- Room temperature cure, no ovens required
- Mild heat acceleration can speed in-line processing
- Good adhesion allows use with many low-solids (no clean) and no-lead solders
- UV indicator allows for automated inspection
- Can be good choice for uses requiring more toughness and abrasion resistance after cure
- Application methods are spray, brush, flow and dip