MFR #:116467.00
EIS #:MOT116467
MFR #:116467.00
EIS #:MOT116467
Out of Stock
Min Qty:1
|Qty Increment:1
more info
LEESON Brakemotors feature a power off manual release for convenience, and for use in case of a power failure. The manual release resets automatically. The standard brake is manufactured by Stearns. The brake coil leads are brought into the conduit box of the motor for easy connection and may be connected to operate when power to the motor is shut off, or to be actuated independent of power to the motor - Leeson Washguard® 116467.00 AC Brakemotor
$1,575.41 / Piece
Min Qty:1
|Qty Increment:1
more info
LEESON Brakemotors feature a power off manual release for convenience, and for use in case of a power failure. The manual release resets automatically. The standard brake is manufactured by Stearns. The brake coil leads are brought into the conduit box of the motor for easy connection and may be connected to operate when power to the motor is shut off, or to be actuated independent of power to the motor - Leeson Washguard® 116467.00 AC Brakemotor
- Attributes
- Features
- Applications
Attributes
General Information
Item NameAC Brakemotor
Trade NameWashguard®
General Features
StandardsUL Listed, CSA Certified
TypeTN
Design & Construction
ConstructionRolled Steel
DutyContinous
Enclosure TypeTotally Enclosed Non-Ventilated
Mounting TypeRound, C-Face with Base
RotationReversible
Bearing TypeBall
Frame Type56C
Insulation TypeClass F
KVA CodeL
Shaft PositionHorizontal
Start MethodAcross The Line
Performance Details
Speed Rating1800 rpm
Brake Rating3 lb-ft
Full Load Efficiency78.5%
1/2 Load Efficiency70.9%
Torque Rating24 oz-ft
Overload ProtectorNo
3/4 Load Efficiency75.8%
Electrical Properties
Frequency Rating60 Hz
Phase3-Phase
Voltage Rating460 V
HP Rating0.5 HP
Full Load Ampere2 A
Full Load Power Factor67%
1/2 Load Power Factor44.1%
Service Factor1.15
3/4 Load Power Factor55.9%
Physical Properties
Dimensions14.5 Inch L x 6.77 Inch H
Number of Poles4
Frame Size56
Shaft Diameter0.625 Inch
Shaft Length1.94 Inch
Weight34 lb
Environmental Condition
Temperature Rating40 °C
Features
- Fail-safe positive stop and holding brakes
- Load stops automatically when power is turned off
- Manual brake release designs
- Dual voltage brake coils
- Single and three phase models
- Wash-down duty models
- Brake kits available
- Coupler brake kits available
- High Cycle models available
- Full Load Ampere: 2 - 1.8A at 208 - 230V, 0.9A at 460V
- Torque Rating: 24 oz-ft (Full Load), 97.8 oz-ft (Break Down), 71.4 oz-ft (Pull Up), 72.1 oz-ft (Locked Rotor)
- Voltage Rating: 208 - 230/460V
Applications
- For use where quick response stopping and holding is required in the application, which may include conveyors, hoists, packaging equipment