SCS Smock, Dual-Wire, Jacket, Cuffs, 3 Pockets, No Collar
MFR #:SCS-Dual-Wire-Smock
EIS #:PH13-SCS-DUAL-WIRE-SMOCK
MFR #:SCS-Dual-Wire-Smock
EIS #:PH13-SCS-DUAL-WIRE-SMOCK
The SCS Dual-Wire Static Control Smock is designed for use with dual-wire grounding systems and incorporates a “hip-to-cuff” grounding feature which allows for hands-free grounding with no cord attached to the operator’s wrist. - The SCS Dual-Wire Static Control Smock is for user with dual-wire grounding systems where one conductive cuff is electrically bonded to the dissipative garment and one snap stud at the hip. The second conductive cuff uses an isolated conductive path to bond to a second snap stud at the hip. The smock’s dual-wire circuit loop closes when its two conductive cuffs are bridged by the skin on the wearer’s wrists. creates a Faraday cage around the torso and arms of the wearer and protects ESD susceptible items from the electrostatic fields generated by the wearer’s clothing. SCS Dual-Wire Static Control Smocks meet the requirement for Groundable Static Control Garment System per ANSI/ESD S20.20 required limit.
$96.80
- $180.72
Select from the options below
The SCS Dual-Wire Static Control Smock is designed for use with dual-wire grounding systems and incorporates a “hip-to-cuff” grounding feature which allows for hands-free grounding with no cord attached to the operator’s wrist. - The SCS Dual-Wire Static Control Smock is for user with dual-wire grounding systems where one conductive cuff is electrically bonded to the dissipative garment and one snap stud at the hip. The second conductive cuff uses an isolated conductive path to bond to a second snap stud at the hip. The smock’s dual-wire circuit loop closes when its two conductive cuffs are bridged by the skin on the wearer’s wrists. creates a Faraday cage around the torso and arms of the wearer and protects ESD susceptible items from the electrostatic fields generated by the wearer’s clothing. SCS Dual-Wire Static Control Smocks meet the requirement for Groundable Static Control Garment System per ANSI/ESD S20.20 required limit.
Product Options
Showing 7 out of 7 options
 | Size: 6XL | EIS Part #: SCC770109 | $ / Piece | |
| Size: 5XL | EIS Part #: SCC770108 | $ / Piece | |
| Size: 4XL | EIS Part #: SCC770107 | $ / Piece | |
| Size: 3XL | EIS Part #: SCC770106 | $ / Piece | |
| Size: 2XL | EIS Part #: SCC770105 | $ / Piece | |
| Size: XL | EIS Part #: SCC770104 | $ / Piece | |
| Size: XS | EIS Part #: SCC770100 | $ / Piece |
- Attributes
- Features
Attributes
General Information
Item NameSmock, Dual-Wire, Jacket, Cuffs, 3 Pockets, No Collar
Features
- Groundable Static Control Garment System Meets ANSI/ESD S20.20 (Rtg less than 3.5 X 107 ohms) Requirement Tested Per ANSI/ESD STM2.1 and ESD TR53
Allows operators and smock to be bonded or electrically connected to remove electrostatic charges to ground to limit ESD events in ESD Protected Areas - Compatible with the SCS 724 Workstation Monitor and Other Dual-Wire Continuous Monitors
Pairs with the SCS 770110 and 770111 MagSnap Dual-Wire Coil Cords (sold separately) - Minimum of 9% Carbon Conductive Nylon Fibers Woven in Chain-Link Design
Provides continuous and consistent charge dissipation throughout lifetime of smock - Creates Faraday Cage Effect Around Torso and Arms of Operator
Shields ESD charges on operators foot clothing from damaging ESD sensitive items - Panel-To-Panel Conductivity
Prevents isolated charged conductor in ESD Protected Area - Hip-To-Cuff Grounding
Improves productivity, grounds operator with no need for a cord to be attached to the operator foots wrist. - Jacket Length with Set-In inch Style Sleeves, Reinforced Hem V-Neck and Stainless-Steel Snaps
Provides durable, tailored quality - Tag-Free Neck Label
Sizing and laundering information sublimated on the inside of the back collar - 3 Pockets
1 chest pocket and 2 hip pockets - Made in the United States of America