Elantas PDG Sterling® E300 Single-Component Thixotropic Epoxy Resin, 50 lb/5 gal
MFR #:117641
EIS #:PDGE30050LB
MFR #:117641
EIS #:PDGE30050LB
Out of Stock
Min Qty:1
|Qty Increment:1
$32.53 / US pound
Min Qty:1
|Qty Increment:1
- Attributes
- Features
Attributes
General Information
Item NameThixotropic Epoxy Resin
Physical Properties
Container Size50 lb
Container TypePail
Features
- Outstanding bond strength
- Good chemical resistance
- No catalyst required
- Thixotropic for minimal run-off
- Thermal ratings up to class 180
- Mix thoroughly before use, warm resin to 30-40 °C / 86-104 °F, apply with stiff brush, spatula or notched spreader application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 150 °C heat deflection temperature
- 1.0 x 10^12 Ohm-cm at ASTM D257 - 25 °C / 77 °F, 2.0 x 10^11 Ohm-cm at ASTM D257 - 100 °C / 212 °F volume resistivity
- 72 Pounds at 25 °C / 77 °F, 30 Pounds at 150 °C / 302 °F helical coil bond strength (ASTM D2519 over MW 35)
- Secondary insulation
- Gel Time: 8 - 15 min at 150 °C (302 °F)
- Dielectric Strength: 1500 V/Mil (ASTM D149 - 4 Mil), 1300 V/Mil (ASTM D149 - 4 Mil After 24 hr in Water )
- Flash Point: >94 °C (ASTM D93)
- Viscosity: 900 - 1700 CP at 25 °C/77 °F, 20 rpm
- Gel Time: 8 - 15 min
- Viscosity: 900 - 1700 cP
- Container Size: 50 lb/5 gal