3M Scotchcast™ 210 Semiflexible Thixotropic Epoxy Electrical Resin
MFR #:Scotchcast™ 210
EIS #:PH21-Scotchcast 210
MFR #:Scotchcast™ 210
EIS #:PH21-Scotchcast 210
3M™ Scotchcast™ is suggested for insulating and sealing motor-winding end turns and slot sections. Part A and Part B are easily mixed in a 1-to-1 ratio by weight. At room temperature the resin has a pot life of 1 to 1 1/2 hours (dependent on mass) and cures in 24-48 hours. 3M Scotchcast 210 can be applied by spatula or by extrusion. - 3M™ Scotchcast™ electrical resin 210 is a 100% solids, room-curing, epoxy resin system. It is useful for a variety of electrical sealing, caulking, filling and patching applications.
$275.77
Select from the options below
3M™ Scotchcast™ is suggested for insulating and sealing motor-winding end turns and slot sections. Part A and Part B are easily mixed in a 1-to-1 ratio by weight. At room temperature the resin has a pot life of 1 to 1 1/2 hours (dependent on mass) and cures in 24-48 hours. 3M Scotchcast 210 can be applied by spatula or by extrusion. - 3M™ Scotchcast™ electrical resin 210 is a 100% solids, room-curing, epoxy resin system. It is useful for a variety of electrical sealing, caulking, filling and patching applications.
Product Options
Showing 3 out of 3 options
 | Container Size: 8 lb | EIS Part #: 3MR2108LB | $ / Kit | |
| Container Size: 2 lb | EIS Part #: 3MR2102LB | $ / Kit | |
| Container Size: 20 lb | EIS Part #: 3MR21020LB | $ / Kit |
- Attributes
- Features
- Documents
Attributes
General Information
Item NameThixotropic Epoxy Electrical Resin
Trade NameScotchcast™
SeriesScotchcast™ 210
General Features
TypeSemiflexible
Design & Construction
Base TypeEpoxy
ColorBrown
Cure TypeRoom Temperature
FormLiquid
Performance Details
Tensile Strength1500 psi
Flexural Strength1000 psi
Moisture Absorption0.44% Weight Gain
Gel Time30 min
Chemical Properties
Specific Gravity1.55
Mixing Ratio1:1 (Weight), 48:52 (Volume %)
Electrical Properties
Dielectric Strength350 V/Mil
Physical Properties
Container TypeKit
Elongation15% at Break
Hardness70 Shore D
Environmental Condition
Temperature Rating130 °C
Features
- Low heat rise during cure, extended pot life
- Good mechanical and thermal shock resistance
- Good retention of electrical properties and flexibility after severe heat aging
- Excellent adhesion to most metals and plastics
- 8.6 x 10^-5 length/unit length/°C linear thermal expansion
- 3400 psi compressive strength
- 7.75 lbs mechanical shock
- 5.3 at 23 °C, 1000 Hz dielectric constant
- 0.10 at 23 °C, 1000 Hz dissipation factor
- 10^12 Ohm-cm at 23 °C volume resistivity
- Filled epoxy liquid resin
- Flash Point: A = 232 °C/450 °F
- Density: A = 1.656 kg/l, B = 1.548 kg/l
- Temperature Rating: Class B (< or equal 130 °C)
- Thermal Conductivity: 8.2 x 10^-4 Cal/sec/cm^2/°C/cm