EIS

Would you like to sign up for deals, discounts, and other important updates from EIS? Sign up

home
0
{0} items in cart
June Shop & Earn
0
0

3M MW-SB 2.5:1 Adhesive-Lined Heat Shrink Tubing

The image shown is representative of the product family and may not specifically be the individual item.  3M™ Heat Shrink Tubing MW is a multiple wall tubing offering the advantage of integral, adhesive lined construction. This tubing has a 2.5:1 shrin…

MFR #:MW-SB

EIS #:PH21-MW-SB

Series #:MW-SB

MFR #:MW-SB

EIS #:PH21-MW-SB

Series #:MW-SB

0
0
3M™ Heat Shrink Tubing MW is a semi-rigid, 110 °C (230 °F) heat-shrinkable polyolefin tubing that is co-extruded and selectively cross-linked to provide an integral, meltable inner wall. When heated in excess of 135 °C (275 °F), the inner meltable wall of the tubing is simultaneously softened and forced by the shrink action into intimate contact with all underlying surfaces, interstices and small voids. - Upon cooling, the MW tubing provides a tough protective and insulating barrier, highly resistant to penetration by moisture and the attack of chemicals and solvents.
$8.26
 - $101.84
Select from the options below
0
0
3M™ Heat Shrink Tubing MW is a semi-rigid, 110 °C (230 °F) heat-shrinkable polyolefin tubing that is co-extruded and selectively cross-linked to provide an integral, meltable inner wall. When heated in excess of 135 °C (275 °F), the inner meltable wall of the tubing is simultaneously softened and forced by the shrink action into intimate contact with all underlying surfaces, interstices and small voids. - Upon cooling, the MW tubing provides a tough protective and insulating barrier, highly resistant to penetration by moisture and the attack of chemicals and solvents.

Product Options

Showing 6 out of 6 options
Expandable Diameter
0.375 Inch
EIS Part #
MW3/8BLKSB
$ / Box
Expandable Diameter
0.75 Inch
EIS Part #
MW3/4BLKSB
$ / Box
Expandable Diameter
1 Inch
EIS Part #
MW1BLKSB
$ / Box
Expandable Diameter
0.125 Inch
EIS Part #
MW1/8BLKSB
$ / Box
Expandable Diameter
0.25 Inch
EIS Part #
MW1/4BLKSB
$ / Box
Expandable Diameter
0.5 Inch
EIS Part #
MW1/2BLKSB
$ / Box

Attributes

General Information
Item NameHeat Shrink Tubing
SeriesMW-SB
General Features
Shelf Life120 Months
TypeAdhesive-Lined, Semi-Rigid
Design & Construction
ColorBlack
Insulation MaterialPolyolefin
Minimum Shrink Temperature135 °C
Wall TypeMultiple
Performance Details
Heat Aging168 hr
Heat Shock4 hr
Low Temperature Flexibility55 °C
Shrink Ratio2.5:1
Tensile Strength2200 psi
Chemical Properties
Specific Gravity1.0
Electrical Properties
Dielectric Strength900 V/mil
Physical Properties
Elongation400%
Length4 ft
Water Absorption0.1%
Environmental Condition
Reflow Temperature80 °C