North American Electric PE444T-150-4-ODP General Purpose Electric Motor, 150 HP, 1800 RPM, 444T Frame, 460V, 3PH, NEMA Design B, 60HZ, 1.15 S.F., ODP, Gen Purp, Cast Iron, Prem Eff, Inverter Duty
MFR #:PE444T-150-4-ODP
EIS #:PE444T-150-4-ODP
MFR #:PE444T-150-4-ODP
EIS #:PE444T-150-4-ODP
Out of Stock
Min Qty:1
|Qty Increment:1
150 HP, Service factor: 1.25 @ 60 Hz, 1.0 @ 50 Hz, Suitable for 575V @ 1.0, NEMA Design B Performance/ High starting torgue, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions, Class F insulation system, Class B rise at full load, Class H vacuum pressure impregnation (VPI) resin for all windings, Heavy duty cast iron housing or rolled steel with corrosion-resistant epoxy paint, stainless steel nameplate and zinc plated hardware, IP23 protection, Condensation drain with plugs - Three-phase, 150 HP, rolled steel 1-20 HP, cast iron 15-300 HP, Open drip proof (ODP), 143T-449T frame, Service factor: 1.25 @ 60 Hz, 1.0 @ 50 Hz, Suitable for 575V @ 1.0, NEMA Design B Performance/ High starting torgue, Dual-drilled feet for mounting flexibility, Lifting provisions
$13,141.53 / Piece
Min Qty:1
|Qty Increment:1
150 HP, Service factor: 1.25 @ 60 Hz, 1.0 @ 50 Hz, Suitable for 575V @ 1.0, NEMA Design B Performance/ High starting torgue, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions, Class F insulation system, Class B rise at full load, Class H vacuum pressure impregnation (VPI) resin for all windings, Heavy duty cast iron housing or rolled steel with corrosion-resistant epoxy paint, stainless steel nameplate and zinc plated hardware, IP23 protection, Condensation drain with plugs - Three-phase, 150 HP, rolled steel 1-20 HP, cast iron 15-300 HP, Open drip proof (ODP), 143T-449T frame, Service factor: 1.25 @ 60 Hz, 1.0 @ 50 Hz, Suitable for 575V @ 1.0, NEMA Design B Performance/ High starting torgue, Dual-drilled feet for mounting flexibility, Lifting provisions
- Attributes
- Features
Attributes
General Information
Item NameGeneral Purpose Electric Motor
Design & Construction
Frame Type444T
Performance Details
Speed Rating1800 rpm
Full Load Efficiency95.8%
1/2 Load Efficiency95%
3/4 Load Efficiency95.4%
Torque Rating442.7 lb-ft
Electrical Properties
Full Load Ampere167 A
Full Load Power Factor88%
1/2 Load Power Factor81%
HP Rating150 HP
Locked Rotor Ampere1085 A
3/4 Load Power Factor86%
Physical Properties
Dimensions39.50 Inch L x 45.9 Inch H
Frame Size444
Shaft Diameter3.38 Inch
Shaft Length8.5 Inch
Weight1672 lb
Features
- Meets or exceeds NEMA Premium® Efficiency Requirements defined by NEMA MG-1
- Rolled Steel Frame on 215T frame and below
- F1/F2 reversible from 254T - 365T and 444T - 449T
- Inverter Duty (20:1 variable torque, 10:1 constant torque)
- Vacuum Pressure Impregnation for all windings
- Sealed bearings thru 215T frame
- IP23 Protection
- Greasable bearings with slinger on 254T frame and above
- Voltage rating: 480V at 60 Hz, 380V at 50 Hz
- Frequency Rating: 50/60 Hz
- Service factor: 1.15 at 60 Hz, 1 at 50 Hz
- Full load ampere: 167A at 480V, 203A at 380V
- Locked rotor ampere: 1085A at 460V
- Torque rating: 442.7 lb-ft (Full Load), 150 lb-ft (Locked Rotor), 250 lb-ft (Break Down)