North American Electric PEXP447TC-200-4 Explosion Proof Motor, 200 HP, 1800 RPM, 447TC Frame, 460V, 3PH, NEMA Design B, 60HZ, 1.15 S.F., TEXP, Explosion Proof, Cast Iron, Prem Eff, Inverter Rated, C-Flange with Feet
EIS #:PEXP447TC-200-4
EIS #:PEXP447TC-200-4
Out of Stock
Min Qty:1
|Qty Increment:1
200 HP, Service factor: 1.15 @ 60 Hz, 1.0 @ 50 Hz, NEMA Design B Performance, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions, Class F insulation system, Class B rise at full load, Class H vacuum pressure impregnation (VPI) resin for all windings, Stainless steel nameplate and zinc plated hardware, corrosion resistant epoxy paint, IP55 protection, Cast iron frame construction - Three-phase, 200 HP, C-Flange w/ feet, Totally enclosed explosion proof (TEXP), 143T-365T frame, Service factor: 1.15 @ 60 Hz, 1.0 @ 50 Hz, NEMA Design B Performance, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions
$33,713.57 / Piece
Min Qty:1
|Qty Increment:1
200 HP, Service factor: 1.15 @ 60 Hz, 1.0 @ 50 Hz, NEMA Design B Performance, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions, Class F insulation system, Class B rise at full load, Class H vacuum pressure impregnation (VPI) resin for all windings, Stainless steel nameplate and zinc plated hardware, corrosion resistant epoxy paint, IP55 protection, Cast iron frame construction - Three-phase, 200 HP, C-Flange w/ feet, Totally enclosed explosion proof (TEXP), 143T-365T frame, Service factor: 1.15 @ 60 Hz, 1.0 @ 50 Hz, NEMA Design B Performance, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions
- Attributes
- Features
Attributes
General Information
Item NameExplosion Proof Motor
General Features
StandardsUL Listed, CSA + C + US Certification, ISO 9001 Certified
Net Weight2348 lb
Design & Construction
Bearing TypeRoller, Ball
Frame Type447TC
Performance Details
Speed Rating1800 rpm
Full Load Efficiency96.2%
1/2 Load Efficiency95.8%
3/4 Load Efficiency96.2%
Torque Rating587 lb-ft
Electrical Properties
Full Load Ampere262.7 A
Full Load Power Factor85%
1/2 Load Power Factor84.2%
HP Rating200 HP
Locked Rotor Ampere1450 A
3/4 Load Power Factor86.8%
Physical Properties
Dimensions47.8 Inch L x 26 Inch H
Frame Size447.0
Number of Poles4
Shaft Diameter3.38 Inch
Shaft Length8.5 Inch
Weight2348 lb
Features
- Meets or exceeds NEMA Premium� Efficiency Requirements defined by NEMA MG-1, Table 12-12
- Lifting provisions on 143T frame and above
- IP55 degree of protection
- Class I, Division I, Groups C and D and Class II, Division I, Groups E, F and G
- Dual voltage ratings suitable for part wind start on lower voltage
- Vacuum pressure impregnation for all windings
- Stainless steel nameplate and zinc plated hardware
- Feet are dual drilled for mounting flexibility
- NEMA design B performance
- Severe duty conversion kit available
- C-flange field conversion kits available
- 95.4 minimum efficiency
- C-face footed
- Frequency Rating: 50/60�Hz
- Full Load Ampere: 217A at 208 - 230/460V, 262.7A at 190/380V
- Service Factor: 1.15 at 60Hz, 1 at 50Hz
- Torque Rating: 587 lb-ft (Full Load), 200 lb-ft (Break Down), 100 lb-ft (Locked Rotor)
- Voltage Rating: 460V at 60 Hz, 380 at 50 Hz