Atkins and Pearce Acryflex®F Suflex® Class F Grade C-2 Acrylic Coated Sleeving
MFR #:Acryflex®F Suflex®-C-2
EIS #:PH21-AcryflexF Suflex-C-2
Series #:Acryflex®F Suflex®-C-2
MFR #:Acryflex®F Suflex®-C-2
EIS #:PH21-AcryflexF Suflex-C-2
Series #:Acryflex®F Suflex®-C-2
Suflex Acryflex-F fiberglass sleeving is a Class F electrical insulation, manufactured by impregnating and coating a finely braided fiberglass sleeving with a dielectric film of acrylic resin. Suflex Acryflex-F sleeving recommended as a universal coated sleeving for all thermal requirements from Class 105 - 155 °C. - Suflex Acryflex-F sleeving has superior mechanical and electrical properties, providing its rated dielectric strength during and after the most severe handling in your application.
$8.52
- $222.22
Select from the options below
Suflex Acryflex-F fiberglass sleeving is a Class F electrical insulation, manufactured by impregnating and coating a finely braided fiberglass sleeving with a dielectric film of acrylic resin. Suflex Acryflex-F sleeving recommended as a universal coated sleeving for all thermal requirements from Class 105 - 155 °C. - Suflex Acryflex-F sleeving has superior mechanical and electrical properties, providing its rated dielectric strength during and after the most severe handling in your application.
Product Options
Showing 6 out of 6 options
 | Length: 250 ft | Gauge: 12 AWG | EIS Part #: ACRC-212NFE | $ / Foot | |
| Length: 250 ft | Gauge: 10 AWG | EIS Part #: ACRC-210NFE | $ / Foot | |
| Length: 250 ft | Gauge: 8 AWG | EIS Part #: ACRC-208NFE | $ / Foot | |
| Length: 250 ft | Gauge: 7 AWG | EIS Part #: ACRC-207NFE | $ / Foot | |
| Length: 250 ft | Gauge: 6 AWG | EIS Part #: ACRC-206NFE | $ / Foot | |
| Length: 100 ft | Gauge: 0 AWG | EIS Part #: ACRC-200NBE | $ / Foot |
- Attributes
- Features
- Applications
Attributes
General Information
Item NameAcrylic Coated Sleeving
Trade NameAcryflex®F Suflex®
SeriesAcryflex®F Suflex®-C-2
Design & Construction
Braid TypeFiberglass
ColorNatural
GradeC-2
Insulation MaterialAcrylic
Insulation TypeClass F
NEMA SpecificationNEMA TF-1
Electrical Properties
Breakdown Voltage800 V
Features
- Compatible with most magnet wire coatings such as polyester, acrylic, polyamide, polyimide, epoxy and phenolic
- Resistant to oils, acids, alkalis and most organic solvents
- Bends without cracking at -25 °C
- Acryflex-F sleeving is an overall superior sleeving in the 105 to 155 °C thermal rating range, Its compatibility with other components of insulation systems is equal or superior to any other type of sleeving in this temperature range
- Use of this one sleeving for class 105 °C, class 130 °C and class 155 °C applications can permit reduction of sleeving inventory with attendant savings
- Acryflex-F sleeving has superior mechanical and electrical properties, providing its rated dielectric strength during and after the most severe handling in your application
- It is fully compatible with most magnet wire coatings such as polyester, acrylic, polyamide, polyimide, epoxy and phenolic, and is proven in applications and laboratory tests in both sealed and unsealed systems
- Resistant to oils, acids, alkalies and most organic solvents, after more than 168 hours in the most commonly used aromatics, xylene and toluene, the dried sleeving substantially regains its original properties
- Low temperature, bends without cracking at 25 °C, weight loss 2 - 3% after 24 hr at 180 °C
- Dielectric Grade: C-2
- Breakdown Voltage: 800 - 1500V
Applications
- Suflex Acryflex-F Sleeving Is Widely Used in Fractional and Integral Horsepower Motors On Leads and Crossovers
- Other Uses Exist in Dry and Oil-Filled Transformers, Relays of Many types, Radio and Television Circuits, and Welding Apparatuses