text.skipToContent text.skipToNavigation

Dow Corning

Dow Corning provides performance-enhancing solutions to serve the diverse needs of more than 25,000 customers worldwide. A global leader in silicone-based technology and innovation, offering more than 7,000 products and services. With that number of products, Dow Corning has a solution for your tough application. Our expertise and leadership in silicone-based materials are behind every product, service and solution we offer.
 
Dow Corning Corporation is transitioning a number of high-quality, reliable, standard silicone products from our Dow Corning® brand to our XIAMETER® business model in pursuit of our two-brand strategy. Products offered under the XIAMETER® brand are manufactured to the same standards – and on the same manufacturing equipment – as they always have been under the Dow Corning brand.

Shop All Dow Corning Products
  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 113 products found
  • Dow Corning 1201 Primer, 13.5 oz Bottle, Clear White to Yellow

    ID: DC1201X348G
    Mfr ID: 1201X348G
    Dow Corning brand primers, prime coats and adhesion promoters offer a variety of benefits to users. Robust adhesion maximizes reliability and offers protection across a wider range of environmental conditions. The range of device design options may be expanded by enabling adhesion or providing lower temperature adhesion to a wider variety of substrate materials. Low-temperature or room-temperature adhesion may also reduce energy or capital costs or increase manufacturing flexibility. Direct material costs may also be reduced when adhesion enhancers enable use of primerless silicones.

     

  • Dow Corning 1-2620 One-Part Low VOC Conformal Coating

    Multiple item options available
    Mfr ID: 1-2620
    RTV elastoplastic conformal coatings have firm, dry surfaces for better handling and abrasion resistance after cure. Various viscosity versions facilitate different application methods. They require atmospheric moisture to cure (no ovens) and their cure rates can be accelerated by mild heat. Conformal coatings are materials applied in thin layers onto printed circuits boards or other electronic substrates.

     

  • Dow Corning 160 Sylgard® Silicone Elastomer

    Multiple item options available
    Mfr ID: 160
    Dow Corning brand silicone encapsulants are supplied as two-part liquid component kits with a mix ratio of 1:1. When liquid components are thoroughly mixed, the mixture cures to a flexible elastomer, which is well suited for the protection of electrical/electronic applications. Dow Corning silicone encapsulants cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement.

    In Stock

  • Dow Corning 164 Sylgard® Silicone Elastomer, 210mL Kit, Dark Gray/Off-White

    ID: DC164X210ML
    Mfr ID: 164-210ML-B
    Dow Corning brand silicone encapsulants are supplied as two-part liquid component kits. When liquid components are thoroughly mixed, the mixture cures to a flexible elastomer, which is well suited for the protection of electrical/electronic applications. Dow Corning silicone encapsulants cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement.

     

  • Dow Corning 170FC Sylgard® Silicone Elastomer

    Multiple item options available
    Mfr ID: 170FC
    Dow Corning brand silicone encapsulants are supplied as two-part liquid component kits with a mix ratio of 1:1. When liquid components are thoroughly mixed, the mixture cures to a flexible elastomer, which is well suited for the protection of electrical/electronic applications. With good flowability and flame resistance, faster cure at room temperature.

     

  • Dow Corning 170K Sylgard® Silicone Elastomer

    Multiple item options available
    Mfr ID: 170K
    Dow Corning brand silicone encapsulants are supplied as two-part liquid component kits with a mix ratio of 1:1. When liquid components are thoroughly mixed, the mixture cures to a flexible elastomer, which is well suited for the protection of electrical/electronic applications. This material has a UL 94 - V-0 flame rating.

    In Stock

  • Dow Corning 186 Sylgard® Silicone Elastomer

    Multiple item options available
    Mfr ID: 186
    Dow Corning silicone encapsulants are supplied as two-part liquid component kits. When liquid components are thoroughly mixed, the mixture cures to a flexible elastomer, which is well suited for the protection of electrical/electronic applications. Rapid, versatile cure processing controlled by temperature.

     

  • Dow Corning 3-1965 Slight Odor One-Part Conformal Coating, 3.6kg Pail, Straw

    ID: DC3-1965X3.6KG
    Mfr ID: 3-1965X3.6KG
    Solventless RTV elastomeric conformal coatings with slight odor require atmospheric moisture to cure, needing no expensive ovens and various viscosity versions facilitate different application methods. These elastomers, when cured, offer the optimum stress relief for even the most delicate components and interconnections in a variety of service environments.

     

  • Dow Corning 3-4241 Two-Part Dielectric Tough Gel, 7.2kg Pail, Yellow/Blue

    ID: DC3-4241X7.2KG
    Mfr ID: 3-4241X7.2KG
    Dow Corning 3-4241 dielectric tough gel may lose adhesion. Full environmental exposure testing is recommended. For applications that require gels with added strength, there are tough or firm gel products. They can assist cost of ownership improvements due to their room temperature cure that requires no ovens though they can be heat accelerated if desired. These materials have enhanced chemical adhesion and cure slightly harder than standard gels, but may have limited applicability depending on processing conditions, device design, end-use environment and other conditions.

     

  • Dow Corning 3-6121 Low Temperature Encapsulant Elastomer, 5.4kg Kit, Translucent White

    ID: DC3-6121X5.4KG
    Mfr ID: 3-6121-5.4KG
    Dow Corning silicone encapsulants are supplied as two-part liquid component kits. When liquid components are thoroughly mixed, the mixture cures to a flexible elastomer, which is well suited for the protection of electrical/electronic applications. Dow Corning silicone encapsulants cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement.

     

  • Dow Corning 3-6559 Cure Accelerator, 0.45kg Bottle, Straw

    ID: DC3-6559X.45KG
    Mfr ID: DC3-6559X.45KG
    Dow Corning 3-6559 cure accelerator, to speed up room temperature cure of all addition-cure (platinum cure) mold making silicone rubbers.

     

  • Dow Corning 4-4 Xiameter® Electrical Insulating Compound

    Multiple item options available
    Mfr ID: 4-4
    Dow Corning 4 electrical insulating compound can be applied by hand, specially designed automated equipment, brushing or wiping. Certain designs of grease guns may seize up with silicone compounds, test prior to use. Dow Corning 4 Compound should not be applied to any surface which will be painted or finished. Such coatings may not adhere to the silicone-treated surface.

    In Stock

  • Dow Corning 550 Silicone Fluid, 20kg Pail, Clear

    ID: DC550X20KG
    Mfr ID: 550X20KG
    Dow Corning 550 fluid clear is a thermally stable, silicone fluid that is used for equipment exposed to radiation such as equipment in nuclear plants, hydraulic arrestors, and hydraulic actuated valves. It offers a high flash point, chemical inertness, low volatility, compressibility, and resistance to heat and radiation.

     

  • Dow Corning 577 Sylgard® Two-Part Primerless Silicone Adhesive

    Multiple item options available
    Mfr ID: 577
    Dow Corning Sylgard 577 two-part heat cure (addition-curing) adhesives cure rate is rapidly accelerated with heat (see cure schedules in table) and an optimum cure schedule will balance processing performance and costs.

     

  • Dow Corning 6-1104 Controlled Volatility Sealant, 142g Tube, Clear

    ID: DC6-1104X142G
    Mfr ID: 6-1104X142G
    Dow Corning 6-1104 CV sealant clear is a one component, moisture curing, space grade silicone sealant that is used to increase performance, reliability, and safety of devices. It offers high elongation, non-flowing, no required mixing, and fast in-line processing.

     

  • Dow Corning 7 Release Compound, 150g Tub, White/Translucent

    ID: DC7X150G
    Mfr ID: 7X150G
    Dow Corning 7 release compound is a versatile, heat stable, highly effective silicone release agent. Used with plastics, rubber, metals and adhesives, it gives long-lasting release, yet remains inert to most materials.

    In Stock

  • Dow Corning 3-8264 Elastomeric Encapsulant

    Multiple item options available
    Mfr ID: 8264
    Dow Corning encapsulant is a low viscosity and Self-priming at moderate temperatures.

     

  • Dow Corning 832 Multi-Surface Adhesive Sealant

    Multiple item options available
    Mfr ID: 832
    Dow Corning 832 multi-surface adhesive sealant is a one-component, ready-to-use, noncorrosive silicone material that seals, bonds and protects. Engineered for use as an all-purpose assembly and maintenance sealant.

    In Stock

  • Dow Corning 92-023 Primer, 340g Can, Clear

    ID: DC92-023X340G
    Mfr ID: 92-023X340G
    Dow Corning 92-023 Primer Clear is used to improve bonding of room temperature and heat curing silicones to a variety of materials such as glass, metals, wood, ceramics, and masonry. It is diluted in heptane, increases flexibility, and increases performance of electronic components. It can be applied by spraying, wiping, or dipping methods.

    In Stock

  • Dow Corning 93-500 Thixotropic Space Grade Encapsulant

    Multiple item options available
    Mfr ID: 93-500
    Dow Corning 93-500 space grade encapsulate is a transparent, room-temperature-curing, solventless silicone material designed for potting, filling, embedding and encapsulating electronic and other equipment for use in the space environment. It is supplied as a nearly colorless, free flowing, low viscosity fluid.

     

  • Dow Corning 94-031 Channel Sealant, 212g Cartridge, Off-White

    ID: DC94-031X212GM
    Mfr ID: 4002244
    Dow Corning 94-031 fluorosilicone channel sealant light gray is a one-component, non-curing putty that is used as a groove injection sealant for aircraft fuel tanks. It is resistant to fuels, oils, shock and vibration.

     

    • 1(current)
    • 2
    • 3