Delfingen Nu-Sleeve™ AG-155 AC435 Class F Grade A Hardener Acrylic Coated Sleeving
MFR #:Nu-Sleeve™ AG-155-A_HRDNR
EIS #:PH21-Nu-Sleeve AG-155-A_HRDNR
Series #:Nu-Sleeve™ AG-155-A_HRDNR
MFR #:Nu-Sleeve™ AG-155-A_HRDNR
EIS #:PH21-Nu-Sleeve AG-155-A_HRDNR
Series #:Nu-Sleeve™ AG-155-A_HRDNR
Nu-Sleeve AG-155 has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery. It exhibits excellent resistance to oils, acids and alkalis and solvents. Resistance to fungus and corona is good. Nu-Sleeve AG-155 is available in NEMA Grades A, B, C-1, C-2 and C-3. - Nu-Sleeve AG-155 is a coated fiberglass sleeving made by applying a proprietary blend of acrylic polymers to a closely woven electrical grade fiberglass substrate. For Grade C-3, dielectric value is dependent on static conditions with no specific voltage value guaranteed.
$3.01
- $542.46
Select from the options below
Nu-Sleeve AG-155 has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery. It exhibits excellent resistance to oils, acids and alkalis and solvents. Resistance to fungus and corona is good. Nu-Sleeve AG-155 is available in NEMA Grades A, B, C-1, C-2 and C-3. - Nu-Sleeve AG-155 is a coated fiberglass sleeving made by applying a proprietary blend of acrylic polymers to a closely woven electrical grade fiberglass substrate. For Grade C-3, dielectric value is dependent on static conditions with no specific voltage value guaranteed.
Product Options
Showing 7 out of 7 options
 | Length: 250 ft | Gauge: 6 AWG | EIS Part #: ACRA06HSNFJ | $ / Foot | |
| Length: 500 ft | Gauge: 4 AWG | EIS Part #: ACRA04HSNHJ | $ / Foot | |
| Length: 500 ft | Gauge: 2 AWG | EIS Part #: ACRA02HSNHJ | $ / Foot | |
| Length: 250 ft | Gauge: 0 AWG | EIS Part #: ACRA00HSNFJ | $ / Foot | |
| Length: 100 ft | Gauge: 0.75 Inch | EIS Part #: ACRA.75HSNBJ | $ / Foot | |
| Length: 100 ft | Gauge: 0.625 Inch | EIS Part #: ACRA.625HSNBJ | $ / Foot | |
| Length: 250 ft | Gauge: 0.5 Inch | EIS Part #: ACRA.5HSNFJ | $ / Foot |
- Attributes
- Features
- Applications
Attributes
General Information
Item NameAcrylic Coated Sleeving
Trade NameNu-Sleeve™ AG-155
SeriesNu-Sleeve™ AG-155-A_HRDNR
General Features
TypeHardner
Design & Construction
ColorNatural
Braid TypeFiberglass
GradeA
Insulation MaterialAcrylic
Insulation TypeClass F
NEMA SpecificationNEMA TF-1
Electrical Properties
Dielectric Strength7000 V
Breakdown Voltage5000 V
Physical Properties
Elongation150%
Features
- Nu-Sleeve AG-155 has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery
- It exhibits excellent heat stability and flexibility for ease of push-up and recovery
- Nu-Sleeve AG-155 is then well suited in harsh environments for the automotive industry
- Excellent cut through resistance
- 2.5 (1000 Hz) dielectric constant
- 0.07 (1000 Hz) dissipation factor
- Flexibility (NEMA TF-1 ) does not crack when bent 180 deg around mandrel after heat age at 175 °C (347 °F) for 96 hours
- Fungus resistance very good - none at 10x
- Abrasion resistance (SAE ARP 1 536) 2500 cycles
- Dielectric Strength: Dry - 7000 V, Wet - >80% Of Dry Value
- Volume Resistivity: 1 Ohm-cm x 10^10 Ohm-cm
- Dielectric Grade: A
- Breakdown Voltage: 5000 - 7000V
- Temperature Rating: -40 to 155 °C
Applications
- For Coil and Winding Industry (Coils, Motors, Generators, Transformers)
- Lighting Fixtures, Transportation (Mass Transit, Rail Cars, Locomotives)
- Industrial Equipment (Tow Motors, Overhead Cranes, Aerial Platforms)
- Technology, Media and Telecommunications, Appliance
- Wind Turbines and Solar Panels, and in Many Other Industrial Fields