Von Roll/John C Dolph Dolphon® CC-1105 Solventless Polyester Resin, 1 gal, Light-Dark Amber
MFR #:198182
EIS #:DOLCC1105G
MFR #:198182
EIS #:DOLCC1105G
Low Stock
Min Qty:1
|Qty Increment:1
CC-1105 is the single best selling electrical impregnation resin on the market. It is a versatile, cost-effective solventless polyester resin, offering excellent tank stability and superior performance characteristics.
Von Roll/John C Dolph Dolphon® CC-1105 Solventless Polyester Resin, 9.6 - 10.0 lb/gal At 77 °F (25 °C) Density, 3000 V/Mil Dielectric Strength, >200 °F Flash Point, 110 - 180 min At 212 °F Gel Time, Aromatic Odor/Scent, 1.20 Specific Gravity, 0.53 BTU/HR/ft²/Inch/°F Thermal Conductivity, 300 - 800 cps 10 rpm At 77 °F (25 °C) Viscosity.
$282.93 / US gallon
Min Qty:1
|Qty Increment:1
CC-1105 is the single best selling electrical impregnation resin on the market. It is a versatile, cost-effective solventless polyester resin, offering excellent tank stability and superior performance characteristics.
Von Roll/John C Dolph Dolphon® CC-1105 Solventless Polyester Resin, 9.6 - 10.0 lb/gal At 77 °F (25 °C) Density, 3000 V/Mil Dielectric Strength, >200 °F Flash Point, 110 - 180 min At 212 °F Gel Time, Aromatic Odor/Scent, 1.20 Specific Gravity, 0.53 BTU/HR/ft²/Inch/°F Thermal Conductivity, 300 - 800 cps 10 rpm At 77 °F (25 °C) Viscosity.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NamePolyester Resin
SeriesDolphon® CC-1105
General Features
TypeSolventless
Design & Construction
ColorLight-Dark Amber
FormLiquid
Performance Details
Gel Time110 min
Technical Details
Flash Point200 °F
Chemical Properties
Specific Gravity1.2
Viscosity300 cP
Electrical Properties
Dielectric Strength3000 V/mil
Physical Properties
Container Size1 gal
Container TypeCan
Odor/ScentAromatic
Features
- High flash point (over 200 °F)
- Solventless
- Versatile - can be used in dip and bake, vacuum, VPI, rollthru and trickle applications
- Included in UL-approved systems up to 220 °C
- Exceptionally high bond strength
- Low VOC emissions
- Low viscosity-excellent penetration into windings
- Refrigerant-resistant (R123 and R134a)
- Excellent tank stability
- Very low build - minimum clean-up and balancing
- Low odor
- Superior chemical resistance
- Excellent for vacuum processing because of low vapor pressure
- 1.5 x 10^14 Ohms at 500V surface resistivity
- 6.2 x 10^15 Ohm-cm Volume Resistivity
- Flash Point: >200 °F
- Viscosity: 300 - 800 cps 10 rpm at 77 °F/25 °C
- Density: 9.6 - 10.0 lb/gal at 77 °F (25 °C)
- Thermal Conductivity: 0.53 BTU/HR/ft®/Inch/°F
- Gel Time: 110 - 180 min
- Viscosity: 300 - 800 cP
- Gel Time: 10 - 15 min At 275 °F
Applications
- Solenoids
- Transformers
- Rotors
- Armatures
- Inductors
- Form Wound Coils
- Ferro Resonant Transformers
- Stators
- Motors
- Chokes
- Brake Coils
- Hermetic Applications