text.skipToContent text.skipToNavigation

Grounding Products / Hardware

  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 205 products found
  • Desco 17155 High Visibility Heel Grounder, Polyester, Yellow/Black, 100/Pack

    ID: 17155-DES
    Mfr ID: 17155-DES
    Mfr: Desco
    Desco's disposable heel grounder provides a path-to-ground and does not generate a charge when used with an ESD floor. The material is non-marring and will not mark floors. The disposable heel grounder is designed for single use and should be removed and disposed of after use.

     

  • SCS 2209 Economy Adhesive Wrist Strap Band, Universal, 5' Cord, White, Each

    ID: 2209-3M
    Mfr ID: 2209-3M
    The SCS 2209 disposable wrist strap meets the ANSI/ESD S20.20 wrist strap system required limit tested per ESD TR53, providing cost effective personnel grounding for visitors to the ESD protected area. Wrist strap is designed for one-time use. The wrist strap is ideally suited for shipment along with ESD sensitive items [ESDS] providing the means to ground personnel opening ESDS packaging and installing contents.

    In Stock

  • ID:
    Mfr ID: 3033-3M
    3M 10 mm press studs are designed to connect a ground cord to a static mat. The snaps are made from nickel plated brass and provide good electrical connection and a long service life. Prong clinch snaps do not require a special tool for installation, the prongs are simply pushed through the mat and then crimped flat on the underside.

     

  • SCS AMWS Wrist Strap Band, Universal, 4 mm Stud Snap, Blue Band/Black Cord, Each

    ID: SCCAMWS
    Mfr ID: SCCAMWS
    Wrist band is made from stainless steel, the durable premium performance metal wristband creates a reliable electrical contact to the user's wrist. The flex-metal style band uses adjustable links to assure a secure and comfortable fit.

     

  • Botron Molded Edge Conductive Anti-Fatigue Floor Mat

    Multiple item options available
    Mfr ID: B57
    Mfr: Botron
    Botron type CSA smooth top vinyl mats and runners designed to reduce strain from standing on hard surfaces. These soil resistant mats are 1/8 Inch thick, available with or without 1/2 Inch or 7/8 Inch foam anti-fatigue backing. They exceed both EOS/ESD and Department of Defense requirements. Available in black runners, and pre-cut floor mats with molded edges and grounding hardware.

     

  • SCS Low-Profile Dual Banana Jack Grounding Cord

    Multiple item options available
    Mfr ID: LPCGC
    This low profile common point ground cord is less obtrusive in the work area. The system connects two wrist straps and a work surface to ground. Holes are provided for permanent mounting to a bench. Available with either a 3/8 Inch (10 mm) stud or socket that securely snaps the cord to the mat.

     

  • SCS TM2448L1BL-L 1-Layer Quality Table Mat Kit, 48" L x 24" W x 0.096" T, Vinyl, Blue

    ID: SCCTM2448L1BL-L
    Mfr ID: SCCTM2448L1BL-L
    Quality 1-layer vinyl mat kits are constructed of homogeneous anti-static vinyl. These worksurface mats are recommended for companies not needing to meet ANSI/ESD S20.20 worksurface required limits.

     

  • SCS Thermoplastic Coiled Grounding Cord

    Multiple item options available
    Mfr ID: 4600
    The 4600 series coil cord is for use with single-wire wrist straps and SCS workstation monitors. Coil cord features a segmented strain relief and a single bundle of tinsel conductors which provide long cord life and easy movement.

     

  • IAC QS-PGK Workmaster™ Personal Ground Kit, Black/Blue, Includes Ground Block, Wrist Strap and Ground Cord

    ID: QS-PGK
    Mfr ID: QS-PGK
    Quick Ship Personal Grounding Kit is a ground block, wrist strap and ground cord. Attaches to user and is connected to ESD grounding lug on worksurface..

     

  • Desco 07515 3-Layer Dual Cup Non-Marring Snap-Loc Foot Heel Grounder, Nylon Polyester Tab, Black/Blue, 2 megohm Resistor

    ID: 07515-DES
    Mfr ID: 07515-DES
    Mfr: Desco
    The 07515 foot grounder provides a continuous ground path between an operator and a properly grounded ESD protected floor. These foot grounders are designed for use on standard shoes. They can be easily adjusted to fit the individual wearer. These foot grounders are made from non-marring three layer grey reversible static dissipative rubber with a non-carbon tear resistant inner scrim layer. This unit includes a blue tab with carbon suffused fibers and a snap-loc system for quick and easy fastening and removal. Full elastic strap provides maximum flexing comfort. This heel grounder is UL listed. The product has been tested to ESD STM 97.2 - floor materials and footwear voltage measurement in combination with a person. It is a suitable ESD footwear component in flooring - footwear system when used as the primary grounding method (< 3.5 x 10^7 ohm per ESD STM 97.1 floor materials and footwear-resistance measurement in combination with a person).

     

  • Desco 07560 Adjustable Hook and Loop Foot Heel Grounder, Nylon Polyester Tab, Black, 1 megohm Resistor

    ID: 07560-DES
    Mfr ID: 07560-DES
    Mfr: Desco
    Desco 07560 foot heel grounder has outer conductive layer (10^5 ohm resistance to top), inner non-marking neoprene layer reinforced with 4.3 oz. polyester mesh scrim layer. 0.06 Inch thick, 1-1/4 Inch wide contact area. 30 Inch long, 3/8 Inch wide, 8 string black conductive ribbon. 3/4 Inch double sided hook and loop material, for quick and easy attachment to foot. 1 megohm series resistor to protect operator from accidental contact with equipment line voltage. Date coded. Provides lot traceability to ensure quality control and tracking information.

    In Stock

  • Desco 07588 Economy Hook and Loop Foot Heel Grounder, Nylon Polyester Tab, Black, 1 megohm Resistor

    ID: 07588-DES
    Mfr ID: 07588-DES
    Mfr: Desco
    2-layer rubber composite material. Material consists of a layer which provides a non-marring interior surface that will not blemish shoes and a black conductive layer to ground via ESD flooring. Non-marring interior will not mar shoes.

    In Stock

  • Desco Lined D-Ring Foot Heel Grounder

    Multiple item options available
    Mfr ID: 0759
    Mfr: Desco
    The 0759 premium series heel grounder provides effective ESD protection. The cup is made from a black and non-marring rubber with inner tear resistant conductive scrim. The rubber is antistatic, low tribocharging, and dissipative. It removes charges when in contact with ESD protected floors. This foot grounder meets the less than 3.5 x 10^6 ohm requirement of ANSI ESD S20.20. This unit includes either a one or two megohm molded external resistor, a conductive tab with carbon suffused fibers, and a D-ring fastening system. The product has been tested to ESD STM97.2 - floor materials and footwear voltage measurement in combination with a person. It is a suitable ESD footwear component in flooring - footwear system when used as the primary grounding method (< 3.5 x 10^7 ohm per ESD STM 97.1 floor materials and footwear-resistance measurement in combination with a person).

    In Stock

  • Desco 07595 Lined D-Ring Foot Toe Grounder, Nylon Polyester Tab, Light Blue/Black, 2 megohm Resistor

    ID: 07595-DES
    Mfr ID: 07595-DES
    Mfr: Desco
    The 07595 premium toe grounder provides effective ESD protection. The cup is made from a black and non-marring rubber with inner tear resistant conductive scrim. The rubber is antistatic, low tribocharging, and dissipative. It removes charges when in contact with ESD protected floors. This foot grounder meets the less than 3.5 x 10^6 ohm requirement of ANSI ESD S20.20. This unit includes a 2 megohm molded external resistor, a conductive tab with carbon suffused fibers, and a D-ring fastening system. The product has been tested to ESD STM 97.2 - floor materials and footwear voltage measurement in combination with a person. It is a suitable ESD footwear component in flooring - footwear system when used as the primary grounding method (< 3.5 x 10^7 ohm per ESD STM 97.1 floor materials and footwear resistance measurement in combination with a person).

    In Stock

  • Desco 09029 Adjustable Replacement Strip, Universal, 4 mm Snap, Light Blue, Each

    ID: 09029-DES
    Mfr ID: 09029-DES
    Mfr: Desco
    Extra wide, soft elastic band. Has silver impregnated polypropylene knitted on inside for superior conductivity. Made with pure silver irreversibly bound to fibers providing both antimicrobial and anti-odor performance. Replacement elastic bands available and easy to replace without tools. Unique adjustment design eliminates exposed conductive "tail" of band. Reusable.

     

  • Desco Metal Expansion Premium Wrist Strap Band

    Multiple item options available
    Mfr ID: 0904
    Mfr: Desco
    Black ABS plastic cap. 300 series stainless steel backplate (0.015 Inch T). Manufacturing date code is stamped into stainless steel back plate. 4 mm snap stud machined from 300 series stainless steel. Fits to 4 mm spring loaded medical type socket. Durable, providing long life well beyond that of sheet metal snaps. Provides >5000V rms insulation per ASTM D149. Will not flake or peel.

     

  • Desco 09060 Adjustable Hook and Loop D-Ring Wrist Strap Band, Universal, 4 mm Stud Snap, Royal Blue, Each

    ID: 09060-DES
    Mfr ID: 09060-DES
    Mfr: Desco
    300 series stainless steel back plate is 0.021 Inch thick. 4 mm snap stud machined from 300 series stainless steel. Fits to 4 mm spring loaded medical type socket. Nylon, hook fastener is royal blue. Return loop for quick and easy adjustment.

     

  • Desco Metal Expansion Premium Wrist Strap with Cord

    Multiple item options available
    Mfr ID: 0908
    Mfr: Desco
    Black ABS plastic cap. 300 series stainless steel backplate (0.015 Inch T). Manufacturing date code is stamped into stainless steel back plate. 4 mm snap stud machined from 300 series stainless steel. Fits to 4 mm spring loaded medical type socket. Coil cord disengages from snap with 1 - 5 lb. of perpendicular force. Durable, providing long life well beyond that of sheet metal snaps.

    In Stock

  • Desco 09085 Adjustable Premium Wrist Strap with Cord, Universal, 4 mm Stud Snap, 6' Coiled Cord, Black, Each

    ID: 09085-DES
    Mfr ID: 09085-DES
    Mfr: Desco
    ABS cap with slotted opening to allow size adjustment. 300 series stainless steel backplate forms channel to hold up to 10 links of band allowing size adjustment. 4 mm snap stud machined from 300 series stainless steel. Fits to 4 mm spring loaded medical type socket. Coil cord disengages from snap with 1 - 5 lb. Of perpendicular force. Inside links constructed of 300 series stainless steel. Width of links is 0.63 Inch, 0.002 Inch polyphenylsulfone sheet is laminated to each link.

    In Stock

  • Desco Jewel ESD Adjustable Coil Grounding Cord

    Multiple item options available
    Mfr ID: 0912
    Mfr: Desco
    The Desco jewel wrist strap single conductor coiled ESD grounding cord is sold 1 per pack and is another quality product from Desco. The termination for this is ESD grounding cord is a banana plug.

     

  • Desco 09700 Alligator Clip

    ID: 09700-DES
    Mfr ID: 09700-DES
    Mfr: Desco
    All adapters designed to accept standard banana plug.

    In Stock

    • 1(current)
    • 2
    • 3