MFR #:8185
EIS #:PH13-8185
Series #:8185
MFR #:8185
EIS #:PH13-8185
Series #:8185
Dualmat is a chemically cross-linked material with different electrical resistances on each side. Because it is inherently cross-linked the material will not delaminate and is volume conductive. Embossed finish reduces glare and prevents parts from slipping. The layers are permanently dissipative with polymers that will not lose electrical properties, will not exudate and more importantly will not outgas and contaminate clean room environments. The material is as durable as rigid laminates, and as comfortable and appealing as softer rubber or vinyl mats. - This ESD mat is a static dissipative industrial-grade elastomer designed for use on tables and other grounded work bench surfaces. It is suitable for use with constant monitor systems. Unlike the competition's surface dissipative mats, the electrical properties of the Dualmat are volume dissipative. This material was developed to conform to the most stringent ESD and lead-free requirements.
$100.74
- $2,189.88
Select from the options below
Dualmat is a chemically cross-linked material with different electrical resistances on each side. Because it is inherently cross-linked the material will not delaminate and is volume conductive. Embossed finish reduces glare and prevents parts from slipping. The layers are permanently dissipative with polymers that will not lose electrical properties, will not exudate and more importantly will not outgas and contaminate clean room environments. The material is as durable as rigid laminates, and as comfortable and appealing as softer rubber or vinyl mats. - This ESD mat is a static dissipative industrial-grade elastomer designed for use on tables and other grounded work bench surfaces. It is suitable for use with constant monitor systems. Unlike the competition's surface dissipative mats, the electrical properties of the Dualmat are volume dissipative. This material was developed to conform to the most stringent ESD and lead-free requirements.
Product Options
Showing 5 out of 5 options
Length: 40 ft | Width: 30 Inch | EIS Part #: ACL8185GR3040 | $ / Piece | ||
Length: 40 ft | Width: 24 Inch | EIS Part #: ACL8185GR2440 | $ / Roll | ||
Length: 72 Inch | Width: 30 Inch | EIS Part #: ACL8185GM3072 | $ / Piece | ||
Length: 60 Inch | Width: 30 Inch | EIS Part #: ACL8185GM3060 | $ / Piece | ||
Length: 36 Inch | Width: 24 Inch | EIS Part #: ACL8185GM2436 | $ / Piece |
- Attributes
- Features
- Applications
Attributes
General Information
Item NameTable Mat
Trade NameDualmat™
Series8185
General Features
StandardsANSI/ESD S20.20, STM 7.1, ASTM F-150, NFPA-99, UL-779, EN 100015, DIN 51953 and IEC-61340-5-1
TypeStatic Dissipative
Design & Construction
ColorGreen
MaterialElastomer
Electrical Properties
Resistance10^6 - 10^8 ohm
Physical Properties
Surface PatternEmbossed
Thickness0.08 Inch
Environmental Condition
ResistsAbrasion
Supporting Information
For Use WithConstant Monitor Systems
Features
- Embossed finish reduces glare and prevents parts from slipping
- 0.08 Inch thickness allows mat to remain flat and prevents curled edges
- 0.05 sec decay time ensures rapid, safe static drain
- Durable surface withstands high temperatures, solder, flux, and harsh chemicals
- Low out gassing and VOC
- No vinyl monomers or DOP ensures conformity to personal and environmental safety standards
- UV additives provide color stability and prevent fading
- 85 +/- 5 shore A hardness per ASTM D-2240
- Withstands soldering iron contact at 250 °F, can withstand environmental temperatures up to 600 °F
- 2.1 x 10^7 ohm resistance between two points (RTT) at 10V
- 6.1 x 10^7 ohm resistance between point-to-ground (RTG) at 10V
- 4.6 x 10^7 ohm-cm volume resistivity at 12% RH
- Ideal for cleanrooms and other controlled environments
Applications
- For use on Tables and other Grounded Work Bench Surfaces