Delfingen Nu-Sleeve™ SG-200 Class H Grade C Silicone Rubber Coated Sleeving, MFR ID Nu-Sleeve™ SG-200-C
- MFR #Nu-Sleeve™ SG-200-C
- EIS #PH21-Nu-Sleeve SG-200-C
- Series #Nu-Sleeve™ SG-200-C
$0.21 - $1,780.34
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack--
| Stock Status | |||||
|---|---|---|---|---|---|
 | 250 ft | 0 AWG | Natural | $ / Foot | |
| 100 ft | 0 AWG | Natural | $ / Foot | |
| 100 ft | 1 AWG | Natural | $ / Foot | |
| 1000 ft | 6 AWG | Natural | $ / Foot | |
| 250 ft | 6 AWG | Natural | $ / Foot | |
| 250 ft | 7 AWG | Natural | $ / Foot |
Nu-Sleeve SG-200 is a braided fiberglass sleeve coated with a liquid silicone rubber. The braid is heat treated to optimize coating adhesion and minimize surface irregularities. - Nu-Sleeve SG-200 is available in 5 electrical grades (A, B, C-1 , C-2 and C-3) . It is highly resistant to end-fray and coating fractures and is a non-flammable sleeve.
Features
- Nu-Sleeve SG-200 is the ideal choice for high stress applications over a wide temperature range from -55 °C (-67 °F) up to 200 °C (392 °F)
- It is used extensively in high-temperature applications where one or more of the following features are required: flexibility, expandability, abrasion resistance, cut through resistance and chemical resistance
- Self-extinguishing with removal of flame source rate of burning
- Dielectric Grade: C
- Dielectric Strength: Dry: 8000 Volt, 60 Hz AC at 500 V/s Rate of Rise, Wet: >80% of the Dry Values
- Temperature Rating: -55 to 200 °C
Applications
- Coil and Winding Industry (Coils, Motors, Generators, Transformers)
- Lighting Fixtures
- Transportation (Mass Transit, Rail Cars, Locomotives)
- Recreational Vehicles
- Pleasure Boats and Commercial Marine
- Industrial Equipment (Tow Motors, Overhead Cranes, Aerial Platforms)
General Information
| Item Name | Silicone Rubber Coated Sleeving |
| Trade Name | Nu-Sleeve™ SG-200 |
| Series | Nu-Sleeve™ SG-200-C |
Design & Construction
| Braid Type | Fiberglass |
| Grade | C |
| Insulation Material | Silicone Rubber |
| Insulation Type | Class H |
| Insulation Coating Type | Silicone |
| NEMA Specification | NEMA TF-1 Type 5 |
Performance Details
| Heat Aging | 136 hr |
| Tensile Strength | 8.3 Mpa |
Electrical Properties
| Dielectric Strength | 8000 V |
Physical Properties
| Elongation | 420% |
| Hardness | 37 Shore A |