text.skipToContent text.skipToNavigation

Test Accessories

All the hardware, assemblies, mounts and holsters to make testing and monitoring procedures more efficient and to keep equipment clean, safe and running smoothly.
  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 158 products found
  • Pomona 3781 Minigrabber® Test Clip Patch Cord Test Lead

    Multiple item options available
    Mfr ID: 3781
    Mfr: Pomona
    The 3781 patch cord has Minigrabber test clips on both ends with cable. The patch cord is ideal for making temporary jumper connections on terminals and wire wrap posts.

    In Stock

  • Mueller Electric BU-27 Heavy Duty General Purpose Clip

    Multiple item options available
    Mfr ID: BU-27
    The BU-27 is a general-purpose Test Clip made of steel with zinc plated finish. This test clip can be attached by crimp or screw connection. It can be used with the BU-29 series PVC insulator. 3 sided jaw.

     

  • Mueller Electric BU-11CPN Heavy Duty Clip, Lug, 200A

    ID: MUE11-C
    Mfr ID: BU-11CPN
    The BU-11CPN is a 200A heavy duty grounding Clip with solid copper construction, steel spring. Can be used with up to 0 AWG wire or welding cable.

     

  • Mueller Electric BU-41C-0 Large Battery Clip, Solder/Crimp, 400A, Black

    ID: MUE41-CBLACK
    Mfr ID: BU-41C-0
    The BU-41C-0 is a 200A black pliers-type battery clip with locks on to both side and top mounted battery terminals. The clip with solid copper and 1.625 Inch maximum jaw opening. Large battery clip with insulators installed. 3/4 Inch width.

     

  • Motor Diagnostic Systems 400395 Test Lead Set

    ID: 400395
    Mfr ID: 400395
    Very flexible 4 wire test sensors for armatures. High quality leads for 4 wire technique resistance testing.

     

  • Pomona 4408 Twisted Pair Cable Assembly Holder, 11" Length, Cold Rolled Steel, Black

    ID: 4408
    Mfr ID: 4408
    Mfr: Pomona
    Twisted pair 2 conductor 10 slot cable assembly holder. Accepts RG 59 and RG 108 cable size types. Cold rolled steel, number 2 temper half hard material. Baked enamel finish.

     

  • Pomona 4233 Test Clip

    Multiple item options available
    Mfr ID: 4233
    Mfr: Pomona
    The 4233 is a do-it-yourself Micrograbber® 43.43 mm probe with test clip. The test clip with gold-plated beryllium copper contact, stainless steel spring, glass filled nylon insulation. Ideal for connecting to small circuit board components. Supports 20 - 22 AWG wire.

     

  • Pomona 4723 Test Clip with Banana Jack

    Multiple item options available
    Mfr ID: 4723
    Mfr: Pomona
    Pomona 4723 Minigrabber with banana jack, black. Connects rapidly to component test leads, terminals and IC leads. Specially designed tips slide easily onto wire-wrap terminals. Do-it-yourself test clips can be assembled quickly and easily.

     

  • Pomona 5143-K-48 Test Clip, SMD Test Tweezer® x Single Stacking Banana Plugs, 30VAC/60VDC (Hand Held), 400VDC (Hand Free), 3A, Black, Red

    ID: 5143-K-48
    Mfr ID: 5143-K
    Mfr: Pomona
    The 5143-K-48 is a test lead with SMD Test Tweezer™ to single stacking banana plug connection. The SMD Test Tweezer™ connector has glass filled nylon body, gold-plated beryllium copper contact and 26AWG RG174/U PVC insulated cable. PVC molded to breakout leads and cable. The standard stacking banana plugs have nickel-plated brass body, nickel-plated beryllium copper spring, polypropylene molded to plug bodies and wire.

     

  • Pomona 5144 Test Lead

    Multiple item options available
    Mfr ID: 5144
    Mfr: Pomona
    The 5144 is a 48 Inch Test Lead with test probe and 4 mm stack-up banana plug. The Test Probe with stainless steel removable micro tip, brass removable chuck, nickel-plated chuck, nylon chuck nut and probe body insulation, 20 AWG stranding PVC insulated 2.21 Inch outer diameter wire. The stacking banana plug with nickel-plated beryllium copper spring, brass plug body, polypropylene molded insulation for plug body and wire, insulated.

     

  •  

  • Mueller Electric BU-35 Insulator

    Multiple item options available
    Mfr ID: BU-35
    The BU‐35 is used to insulate BU‐33C big brute clip from foreign objects. 5kV dielectric strength.

     

  • Fluke SureGrip™ AC285 Alligator Clip, 600/1000V, 10A, Rubber, Steel Jaw, Red, Black

    ID: FLUKE-AC285
    Mfr ID: AC285
    Mfr: Fluke
    SureGrip accessories are designed to improve steadiness in slippery hands. . One pair (red, black) of large alligator clips with nickel plated steel jaws. Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt.

     

  • Fluke TL71 Premium DMM Test Lead Set, 4 mm Right Angle Banana Plug, 600V, 1000V, 10A, Red, Black

    ID: TL71-FLU
    Mfr ID: TL71
    Mfr: Fluke
    Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter.

     

  • Pomona 6341 Right Angle Single Banana Plug Precision Electronic Test Probe, 1M, 1000Vrms

    ID: 6341
    Mfr ID: 6341
    Mfr: Pomona
    The 6341 is a replaceable tip precision electronic probe kit with right angle sheath banana plug. The probe with Santoprene rubber over polypropylene probe body, nickel plated brass plug body, nickel plated beryllium copper spring, Santoprene insulation, 20 AWG silicone rubber insulated resists burning 0.089 Inch outer diameter wire. Gold plated or stainless steel probe tips. Safety design complies with all the latest standards.

     

  • Mueller Electric BU-87-2 Insulator, 1.703" Length, PVC, Red

    ID: MUE87RED
    Mfr ID: BU-87
    The BU-87-2 is a red Insulator made of flexible PVC. It is suitable for use with the BU-85 series clips. 5kV dielectric strength.

     

  • Pomona 1325 Solderless Stackable Standard Banana Plug

    Multiple item options available
    Mfr ID: 1325
    Mfr: Pomona
    The 1325 is standard banana plug in solderless and stackable style. Designed to fit on the end of any 22 - 18 AWG wire. Cross hole wire entry fits wires up to 0.12 Inch (3 mm) diameter. Available with tarnish resistant nickel or gold plating for very low contact resistance. Gold plated beryllium copper banana jack. Nickel plated brass banana plug with nickel plated beryllium copper spring.

     

  • Mueller Electric BU-26 Insulator

    Multiple item options available
    Mfr ID: BU-24
    The BU-26-2 is a red Test Clip Insulator made of flexible PVC. It is ideal for use with the BU‐24 and BU‐25 series clips from foreign objects. 5kV dielectric strength.

     

  • Pomona 1269 BNC Female to Double Stacking Banana Plug Straight Coaxial Adapter, 1.13" L x 0.66" W x 2.05" H

    ID: 1269-POM
    Mfr ID: 1269
    Mfr: Pomona
    Pomona 1269 coaxial adapter converts double banana jack test instruments to BNC coaxial configuration for added shielding protection. For test versatility, banana plugs can be vertically and horizontally stacked to the adapter.

     

  • Pomona 1166 Alligator Clip to Stacking Banana Plug Patch Cord Test Lead

    Multiple item options available
    Mfr ID: 1166
    Mfr: Pomona
    Pomona's alligator clip to stacking banana plug patch cord offers quick attachment to terminals up to 0.3 Inch OD. The patch cord features a medium size alligator clip with a flex boot for insulation protection. The banana plug spring is beryllium copper for long insertion life.

     

  • Pomona 1296 BNC Male to Double Stacking Binding Post Straight Coaxial Adapter, 1.13" L x 0.66" W x 2.48" H

    ID: 1296
    Mfr ID: 1296
    Mfr: Pomona
    Pomona 1296 coaxial adapter converts BNC based test instruments to double binding posts with banana jacks. Binding posts can be vertically and horizontally stacked for test versatility. Wires, spade lugs, pin tip plugs and banana plugs can be attached by means of the insulated polycarbonate knurled thumb knob.

     

    • 1(current)
    • 2
    • 3