text.skipToContent text.skipToNavigation

Soldering Materials

Wide variety of stocked options of high quality solder wire, solder paste, solder bar, solder flux, mask, thinner, and all the materials needed for the electronic assembly, semiconductor and solar soldering applications.

  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 162 products found
  • Contronic Devices Inc 1030 PC Flex Mask, 8 oz Squeeze Bottle

    ID: 1030-C0N
    Mfr ID: 1030
    PC Flex Mask regular viscosity is a green single-component natural latex rubber that cures at room temperature. This material is formulated to resist the adhesion of solder to specified areas of the circuit board during the soldering operation. It will withstand temperatures up to 268C/515F during the normal soldering operation (not to exceed 5 seconds).

     

  • Kester 104 Flux Thinner, 1 gal, For 1544/1589 Flux

    ID: KES104G
    Mfr ID: 6300000104
    The Kester 104 flux thinner is used for reducing solids or replacing evaporated solvent, resulting in maximum efficiency of the flux.

     

  • Kester 135 Rosin Non-Activated Soldering Flux, 1 gal Bottle, Amber

    ID: KES135G
    Mfr ID: 6300000135
    The Kester 135 non-activated rosin flux is an amber colored homogeneous solution of pure water-white rosin dissolved in a suitable solvent. The particular solvents used are liquids which exhibit the same non-corrosive and non-conductive properties as rosin itself. The high purity grade of alcohol solvent makes this flux very reliable for solderability testing.

     

  • Kester 5760 Neutralizer, 1 gal, Blue

    ID: KES5760G
    Mfr ID: 6300005760
    The Kester 5760 neutralizer is a buffered, alkaline concentrated formula which effectively removes both organic and inorganic acid flux residues. This includes water soluble fluxes used in wave soldering, hot air leveling and infrared reflow processes. 5760 Neutralizer will completely solublilize chloride complex residues such as lead chloride by selective chelation so that a water rinse will remove all traces of harmful contamination.

     

  • Kester Sn05 Pb95 Soldering Wire, 0.062" Dia, 1 lb Spool

    ID: SN05SW.062
    Mfr ID: 1405950062
    Complete analysis of Kester Solder Wire prove that every batch conforms to the strictest quality control standards in the solder industry. Kester leaded and lead-free solid core solder wire meets IPC J-STD-006C. Kester solder wire purchased directly or through Kester stocking distributors will conform to these requirements.

    In Stock

  • Kester Sn60 Pb40 Soldering Wire

    Multiple item options available
    Mfr ID: 6040
    Complete analysis of Kester Solder Wire prove that every batch conforms to the strictest quality control standards in the solder industry. Kester leaded and lead-free solid core solder wire meets IPC J-STD-006C. Kester solder wire purchased directly or through Kester stocking distributors will conform to these requirements.

     

  • Kester 245 No-Clean Sn60 Pb40 Soldering Wire

    Multiple item options available
    Mfr ID: 6040-245
    The Kester 245 no-clean cored wire was developed to complement low residue liquid fluxes being used by the electronics industry. The chemistry is based on some of the same principles that have been safely used for years in mildly activated rosin fluxes. Kester 245 is Bellcore GR-78 compliant.

     

  • Kester 275 No-Clean Sn63 Pb37 Soldering Wire

    Multiple item options available
    Mfr ID: 6337-275
    The Kester 275 no-clean flux for cored solder wire was developed to provide superior wetting performance for hand soldering in the electronics industry. The chemistry is based on some of the same principles that have been safely used for years in mildly activated rosin fluxes.

     

  • Kester 920-CXF No-Clean Soldering Flux, 1 gal Bottle, Light Yellow

    ID: KES920CXFG
    Mfr ID: 6303460920
    The Kester 920-CXF is a zero halogen, low solids, no-clean organic flux designed for wave soldering conventional and surface mount circuit board assemblies. This flux eliminates defects often experienced in surface mount assembly wave soldering operations with traditional fluxes. This non-corrosive and non-conductive flux has an extremely low solids content. There is essentially no residue left on the assembly after soldering. There are no residues to interfere with electrical testing and the expense of cleaning is eliminated.

     

  • Kester Sn96.3 Ag3.7 Soldering Wire

    Multiple item options available
    Mfr ID: 96337
    Complete analysis of Kester Solder Wire prove that every batch conforms to the strictest quality control standards in the solder industry. Kester leaded and lead-free solid core solder wire meets IPC J-STD-006C. Kester solder wire purchased directly or through Kester stocking distributors will conform to these requirements.

     

  • Bonkote America BON-102A 7 Pieces Flux Dispensing Pen Kit, Fine Tip

    ID: BON-102A
    Mfr ID: BON-102A
    This flux pen enables fine and accurate flux application. Features fine point nylon tip. No flux evaporation, Flux density can be kept constant and Flux can be refilled - economical design.

     

  • Kester 108 Flux Thinner, 1 gal, For 197 Flux

    ID: KES108G
    Mfr ID: 6300000108
    Kester 108 Flux Thinners are used for reducing solids or replacing evaporated solvent, resulting in maximum efficiency of the flux in an open vessel application such as foam fluxing or dipping.

     

  • Kester 120 Flux Thinner

    Multiple item options available
    Mfr ID: 120
    The Kester 120 flux thinner is used for reducing solids or replacing evaporated solvent, resulting in maximum efficiency of the flux.

     

  • Kester 1589 Rosin Activated Soldering Flux, 1 gal Bottle, Amber

    ID: KES1589G
    Mfr ID: 6300001589
    The Kester 1589 activated rosin liquid flux is a homogeneous solution of high quality, purified grade WW rosin blended into an alcohol solvent system. 1589 includes a very effective activating agent to provide superior fluxing ability. 1589 can be used for solder coating or tinning bare leads.

     

  • Kester 186 Rosin Mildly Activated Flux Pen, 1/3 oz

    ID: 186-FLUXPEN
    Mfr ID: 8310000186
    The Kester 186 flux pen is specifically designed for leaded and lead-free rework of conventional and surface mount circuit board assemblies. 186 under MIL-F-14256, was QPL approved as type RMA. Although the fluxing ability approaches that of Type RA flux, residues after soldering are non-corrosive and non-conductive. 186 has been developed for use in critical applications where difficult assemblies are to be soldered, but process requirements stipulate use of Type RMA flux. The use of a minimum of ionic activating agents and the inactive nature of the residue permits leaving the residue on circuit board assemblies for many applications.

     

  • Kester 715 Inorganic Acid Soldering Flux, 1 gal Bottle, Colorless to Light Yellow

    ID: KES715G
    Mfr ID: 6300000715
    The Kester inorganic acid fluxes are solutions of inorganic salts for use as general all-purpose fluxes. These fluxes are active formulations for soldering difficult-to-solder metals. The inorganic acid fluxes were developed for non-electronic soldering applications and provide maximum wetting, leaving residues which can be removed with water. The corrosive nature of the residues precludes their use for electrical or electronic applications.

     

  • Kester 952-D6 No-Clean Flux Pen, 1/3 oz

    ID: 952-D6-FLUXPEN
    Mfr ID: 8310460952
    The Kester 952-D6 flux pen is a no-clean, non-corrosive, halide-free flux pen that is specifically designed for lead-free rework of conventional and surface mount circuit board assemblies. Essentially no residue remains after soldering. A major advantage of this flux is the reduced odor associated with the soldering process. 952-D6 incorporates a small amount of rosin for higher reliability.

     

  • Kester 958 No-Clean Soldering Flux

    Multiple item options available
    Mfr ID: 958
    The Kester 958 is a no-clean, non-corrosive liquid flux that is specifically designed for the wave soldering of conventional and surface mount circuit board assemblies. 958 was developed to give excellent soldering performance on bare copper printed circuit boards treated with OSP coatings. Essentially, no residue remains after soldering. A major advantage of this flux is the reduced odor associated with the soldering process.

     

  • ITW Chemtronics CircuitWorks® Conductive Pen

    Multiple item options available
    Mfr ID: CW2200
    CircuitWorks conductive pens make instant highly conductive silver traces on circuit boards and are used in prototype, rework and repair of circuit boards by linking components, repairing defective traces, making smooth jumpers. The silver traces dry in min and have excellent adhesion to most electronic materials.

     

  • Kester PS-22-KIT Flux Concentration Control Test Kit

    ID: PS-22-KIT
    Mfr ID: PS-22-KIT
    The Kester PS-22 is a kit used to determine the acid number of the flux. The test is a simple drop test with an indicator for the endpoint (similar to a swimming pool test). You count the drops and then go to a chart. From the chart you determine how much thinner to add to bring the acid number back down to specifications.

     

  • ITW Chemtronics CW8 Chemask® Solder Mask, 8 oz Squeeze Bottle, Blue, 24/Case

    ID: CHECW8
    Mfr ID: CW8
    Chemask W solder mask is water soluble and designed to be removed with most aqueous cleaning systems. Chemask W contains high temperature compounds that protect component-free areas from solder during wave soldering.

     

    • 1(current)
    • 2
    • 3