text.skipToContent text.skipToNavigation

Desoldering & Rework Equipment

All the latest technologies and most trusted brands in desoldering stations, hot-air rework systems, reflow/rework systems and pre-heaters, manual desoldering pumps, and SMD removal; from the hobby level to high-volume desoldering operations, there is a system and method right for your application and industry.

  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 62 products found
  • Weller WHP80 Pre-Heating Plate, 80W, 24V

    ID: 0052702899
    Mfr ID: WHP80
    Mfr: Weller
    Temperature controlled preheat plate. For slowly increasing the temperature of a PC board prior to rework. Compatible with lead-free solders. For use with WD1, WD2, WD1M and WD2M soldering stations and WR rework units.

     

  • Edsyn DS017 Soldapullt® Deluxe Desoldering Hand Tool

    Multiple item options available
    Mfr ID: DS017
    Mfr: Edsyn
    High vacuum desoldering pump removes solder around component leads in circuit board holes. Easy one-hand loading and operation. Integral cleaning shaft self-cleans no-stick PTFE tip Made of high impact plastic.

    In Stock

  • Hakko FM204-01 Self-Contained Desoldering and Soldering Station, 120W, 120V, 6.3" W x 4.7" H x 8.9" D

    ID: FM204-01-HAK
    Mfr ID: FM204-01
    Mfr: Hakko
    Hakko FM204-01 is a self-contained desoldering and soldering station with a built-in vacuum pump. Tips and nozzles are not included. This versatile station uses the N3 series quick-change composite nozzles.

     

  • Metcal MX-5211 2 Port Digital Soldering and Rework System with 2 Handpieces, 100 - 240VAC, 125W

    ID: MX-5211
    Mfr ID: MX-5211
    Mfr: Metcal
    Can be operated with two hand-pieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed. Configured with the Metcal UltraFine Soldering Hand-piece. MX-5211 can be used for conduction rework of SMDs when using SMTC Series soldering cartridges simultaneously.

     

  • Metcal PCT-1000 Programmable Pre-Heater, 1200W, 100 - 240VAC, 13" L x 8" W x 3" H

    ID: PCT-1000
    Mfr ID: PCT-1000
    Mfr: Metcal
    The PCT-1000 is a programmable pre-heater that provides users the ability to increase heat capacity with highly controlled thermal output. The PCT-1000 can be used in a variety of processes including soldering, desoldering, SMD rework operations and, with its added heat capacity, will provide faster production rates while lowering overall process temperatures.

     

  • Weller WR2 2 Channel LCD with Backlight Rework Station, 120V, 300W

    ID: WR2-WEL
    Mfr ID: WR2
    Mfr: Weller
    Digital self-contained multi-channel rework station. Simultaneous use of multiple tools. Self-contained vacuum and air. Extraction rate of 1Lpm, 15Lpm. Weller WR2 series stations will not operate with hot air/desoldering tools connected simultaneously.

     

  • Edsyn 1036 Loner® Atmoscope® Self-Contained SMT Deluxe Hot Air Station, 150W, 120V, 5.2" W x 8-1/2" H x 10" D

    ID: 1036-EDS
    Mfr ID: 1036
    Mfr: Edsyn
    Loner Atmoscope self-contained SMT hot air station with FA069 PS542 and PD525. This station is perfect for lab-type settings where shop air is not available. With a helpful variety of hot air tips at your disposal you will find soldering with this station a breeze.

     

  • Aven 17535 Solder Sucker Desoldering Pump, 13" OAL

    ID: 17.535
    Mfr ID: 17535
    Rugged, manual loading tool for volume desoldering. High vacuum heavy-duty plastic, fully enclosed shaft for safety. Plunger locks for compact storage. Cushioned shock reduction minimizes board damage.

     

  • Hakko 472D Desoldering Station with Tool

    Multiple item options available
    Mfr ID: 472D
    Mfr: Hakko
    The 472D desoldering tool provides digital desoldering and process control. The Hakko 472D comes with a control card. When the card is removed all parameter and temperature settings are locked into the system memory.

     

  • Weller 51317399 Tweezer Set, For Precise Desoldering of Very Small SMD Components

    ID: 0051317399
    Mfr ID: 51317399
    Mfr: Weller
    Precise desoldering of very small SMD components. Tips are parallel in the tip cartridge so they are always in alignment. Compatible with WD1M and WD2M high speed power units. The tips are automatically switched off when placed in the WMRTH stand. Uses RTW series plug-in style tip cartridges.

     

  • Weller 7880 Manual Desoldering Pump

    ID: 7880-WEL
    Mfr ID: 7880
    Mfr: Weller
    Powerful, heavy-duty, spring-loaded vacuum for complete solder removal. Cushioned plunger, easy thumb activation and ribbed pencil grip. Facilitates accurate printed circuit repair and cleaning.

     

  • Hakko 817 Pistol Grip Desoldering Gun, 24VAC, 60W

    ID: 817-01-HAK
    Mfr ID: 817-01
    Mfr: Hakko
    The Hakko 817-01 desoldering gun for use with the Hakko's 472D, 473 and 703 desoldering stations. Any station that uses the 807 desoldering iron can use the Hakko 817-01 desoldering gun/iron.

     

  • Hakko 851-2 Rework Hot Air Station, 85W, 110V

    ID: 851-2-HAK
    Mfr ID: 851-2
    Mfr: Hakko
    Hakko use this station for shrinking tubing or soldering and desoldering small SMC components. ESD protected, it also features adjustable temperature control from 212 deg to 1004 deg F (100 deg to 540 deg C) and an air volume selector switch with an ultra-light setting.

     

  • Hakko 950-CK Tweezer Kit

    ID: 950-CK
    Mfr ID: 950-CK
    Mfr: Hakko
    Direct heating less influence upon surrounding components on crowded boards. Easy removes SMD chips and flat pack's up to 25 mm. The collet allows easy replacement and alignment of the tip.

     

  • Edsyn 971HA Loner® Atmoscope® SMT Hot Air Station, 15 - 220W, 120V, 4.1" W x 9.7" H x 10" D

    ID: 971HA-EDS
    Mfr ID: 971HA
    Mfr: Edsyn
    Our best value when it comes to hand held SMT rework and other hot air applications. This station has the versatility to suit a large variety of applications and it's modular design offers outstanding performance with either hot air or traditional contact rework.

     

  • Hakko FM-206 Desolder-Solder-Air Configuration System 3 Port Digital Rework Station, 120V, 410W

    ID: FM206-DSA-HAK
    Mfr ID: FM206-DSA
    Mfr: Hakko
    The station's sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and or simultaneous use of the Hakko FM-2030 heavy-duty soldering iron, making this the ultimate rework station. The Hakko FM-206 3-port rework station will power any Hakko FM series handpiece, including FM-2027, FM-2030, FM-2032, FM-2022, FM2023, FM-2024, FM-2026 and FM-2029 thus offering the ability for you to tailor the station to fit your specific rework needs.

     

  • Hakko FM-206 Desolder-Solder-Solder Configuration System 3 Port Digital Rework Station, 120V, 410W

    ID: FM206-DSS-HAK
    Mfr ID: FM206-DSS
    Mfr: Hakko
    The Hakko FM-206 3-port rework station will power any Hakko FM series handpiece, including FM-2027, FM-2030, FM-2032, FM-2022, FM2023, FM-2024, FM-2026 and FM-2029 thus offering the ability for you to tailor the station to fit your specific rework needs. 3 simultaneous powered ports. The station's sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and or simultaneous use of the Hakko FM-2030 heavy-duty soldering iron, making this the ultimate rework station.

     

  • Hakko FM-206 Solder-Tweezer-Air Configuration System 3 Port Digital Rework Station, 120V, 410W

    ID: FM206-STA-HAK
    Mfr ID: FM206-STA
    Mfr: Hakko
    The Hakko FM-206 3-port rework station will power any Hakko FM series handpiece, including FM-2027, FM-2030, FM-2032, FM-2022, FM2023, FM-2024, FM-2026 and FM-2029 thus offering the ability for you to tailor the station to fit your specific rework needs. Auto shut-off with sleep function. The station's sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and or simultaneous use of the Hakko FM-2030 heavy-duty soldering iron, making this the ultimate rework station.

     

  • Hakko FM-206 Desolder-Tweezer-Solder Configuration System 3 Port Digital Rework Station, 120V, 410W

    ID: FM206-DTS-HAK
    Mfr ID: FM206-DTS
    Mfr: Hakko
    The Hakko FM-206 3-port rework station will power any Hakko FM series handpiece, including FM-2027, FM-2030, FM-2032, FM-2022, FM2023, FM-2024, FM-2026 and FM-2029 thus offering the ability for you to tailor the station to fit your specific rework needs. The station's sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and or simultaneous use of the Hakko FM-2030 heavy-duty soldering iron, making this the ultimate rework station. Configurable display in deg C or deg F.

     

  • Hakko FR-1418-03 SMD Single Zone BGA Rework System, 120VAC, 28" L x 28" W x 28" H

    ID: FR1418-03-HAK
    Mfr ID: FR-1418-03
    Mfr: Hakko
    The Hakko FR-1418 BGA rework system is constructed of heavy-walled aluminum castings for unsurpassed precision and stability and uses precisely controlled solder reflow profiles. The system features a unique gantry style construction similar to that of a pick-and-place machine, which allows the PCB to remain stationary while the head moves to accomplish the X, Y, Z and Theta alignment.

     

  • ID:
    Mfr ID: FR860-01F
    Mfr: Hakko
    The Hakko FR-860 preheat plate is a compact low profile solution for the conductive preheating of heavy printed circuit boards and other heat sink assemblies where preheating is required for soldering and rework. The design of the FR-860 provides fast, efficient, even heating across the surface of the plate and the microprocessor control ensures a temperature stability of +/- 5 deg C. Selectable inputs for the closed loop temperature control allows for the precise regulation of the preheat temperature by either plate temperature input or remote thermocouple input.

     

    • 1(current)
    • 2
    • 3