MFR #:234501100A02000036
EIS #:OAK2345-1X2
MFR #:234501100A02000036
EIS #:OAK2345-1X2
Out of Stock
Min Qty:1
|Qty Increment:1
more info
Saint-Gobain 2345-1 polyimide films are employed because of their extreme heat resistance. Service temperatures range from -100 to 500 °F. These flame retardant films exhibit high tensile strength and conformability, good solvent resistance, excellent dielectric strength and good abrasion resistance. - 2345-1 has a silicone adhesive. Polyimide tape applications include electrical insulation, capacitor, transformer and coil wrapping, electronic assembly and wave solder protection.
$67.75 / Roll
Min Qty:1
|Qty Increment:1
more info
Saint-Gobain 2345-1 polyimide films are employed because of their extreme heat resistance. Service temperatures range from -100 to 500 °F. These flame retardant films exhibit high tensile strength and conformability, good solvent resistance, excellent dielectric strength and good abrasion resistance. - 2345-1 has a silicone adhesive. Polyimide tape applications include electrical insulation, capacitor, transformer and coil wrapping, electronic assembly and wave solder protection.
Product Options
Showing 3 out of 3 options
Width: 2 Inch | EIS Part #: OAK2345-1X2 | $ / Roll | ||
Width: 1.5 Inch | EIS Part #: OAK2345-1X1.5 | $ / Roll | ||
Width: 1.25 Inch | EIS Part #: FUR2345-1X1.25 | $ / Roll |
- Attributes
- Features
- Applications
Attributes
General Information
Item NameSolder Masking Tape
Series2345-1
General Features
Shelf Life6 Months
Design & Construction
Adhesive TypeSilicone
Backing MaterialPolyimide
ColorAmber
Performance Details
Adhesive Strength25 oz/Inch
Breaking Strength30 lb/Inch
Flame RetardantYes
Tensile Strength30 lb/Inch
Electrical Properties
Dielectric Strength6500 V
Physical Properties
Width2 Inch
Elongation50%
Length36 Yard
Thickness2.5 mil
Environmental Condition
ResistsHeat, Solvent, Abrasion
Temperature Rating180 °C
Features
- Electrical grade has excellent mechanical and electrical properties as well as a high conformability
- Offers outstanding resistance to cut-through and is impact and abrasion resistant
- Offers excellent dielectric strength, while the burning of the adhesive forms a non-conductive ash
- Polyimide backing meets MIL-P-46112B
Applications
- For Holding, Insulating or Wrapping and Gold Finger Protection During Wave Solder