Von Roll/John C Dolph Synthite® AC-41 Air-Drying Varnish
- MFR #Synthite® AC-41
- EIS #PH21-Synthite AC-41
$18.89 - $150.51
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack--
| Stock Status | |||
|---|---|---|---|
 | 55 gal | $ / US gallon | |
| 5 gal | $ / US gallon | |
| 1 gal | $ / US gallon | |
| 20 Oz | $ / each |
AC-41 is a high-temperature, fast cure, air dry, polyurethane varnish, and is an excellent conformal coating for all electrical and electronic parts. - It is especially recommended as a circuit board coating.
Features
- High-temperature rating
- Excellent chemical resistance
- Oil and moisture resistant
- Superior abrasion resistance
- Excellent adhesion
- Dielectric Strength: 2000 V/Mil (Dry), 1200 V/Mil (Wet)
- Viscosity: 125 - 275 CP at 25 °C
- Viscosity: 125 - 275 cP
Applications
- For Field Coils, Control Coils, Motor Frames, Switch Bases, Molded Bakelite, Electrical Connectors, Collector Rings, Fuse Tubes, Solenoid Coils, Controller Shafts, Printed Circuit Boards, Commutator Ends, Porcelain, Soldered Joints, Finger Blocks, Oil Reservoir, Interior, Buss Bars, Touch Up Overcoat, Ease of Application
General Information
| Item Name | Varnish |
| Trade Name | Synthite® |
| Series | Synthite® AC-41 |
General Features
| Shelf Life | 12 Months (Bulk), 18 Months (Spray) |
| Type | Air-Drying |
Design & Construction
| Color | Clear |
| Cure Type | Room Temperature |
| Form | Liquid |
Performance Details
| Dry Time | 30 min |
| Full Cure Time | 10 min Set to Touch, 30 min Tack Free at 25 °C |
Technical Details
| Flash Point | 81 °F |
Chemical Properties
| Viscosity | 125 cP |
| VOC | 4.3 lb/gal |
Electrical Properties
| Dielectric Strength | 2000 V/mil |
Physical Properties
| Odor/Scent | Aromatic |
Environmental Condition
| Temperature Rating | 155 °C |