Mar-Bal Glastic® 2165 Standoff Insulator
- MFR #Glastic® 2165
- EIS #PH21-Glastic 2165
$229.19 - $392.18
Refine your product below or compare all choices in the
Cantidad mínima1QTY Increment1
more info
Paquete--| Stock Status | ||||
|---|---|---|---|---|
 | 1.25 Inch | 1/4 - 20-5/16 Inch | $ / each Paquete: 250/Pack |
Molded Insulators have a higher resistance to heat and moisture when compared to regular plastic insulators. These molded insulators also have closer height tolerances and higher shatter resistance when compared to ceramic insulators. - Hi-Pot tested to assure electrical reliability. Wet or dirty conditions may require derating an insulator.
Features
- Glastic standoff insulators are molded of underwriters laboratories incorporated® (UL) recognized flame resistant fiberglass-reinforced thermoset polyester molding compound
- They feature shatter resistance and closer height tolerances than commonly available in porcelain insulators
- Moisture and heat-resistance properties of glastic insulators are higher than those of conventional plastic insulators
- Insulators mounted within a suitable electrical cabinet are considered indoors even though the cabinet itself is outdoors
- An insulator will withstand its rated voltage continuously but industry standards or other specifications may require a different spacing from conductor to ground for a particular voltage
Applications
- Glastic Insulators are Primarily Intended to be Used Indoors or Inside a Suitable Enclosure
General Information
| Item Name | Standoff Insulator |
| Trade Name | Glastic® |
| Series | Glastic® 2165 |
General Features
| Net Weight | 0.06 lb |
Design & Construction
| Color | Red |
| Material | Polyester |
Performance Details
| Cantilever Strength | 400 Inch-lb |
| Compression Strength | 8000 lb |
| Tensile Strength | 1000 lb |
| Torque Strength | 12 ft-lb |
| Track Resistance | 600 min |
Electrical Properties
| Voltage Rating | 600 V |
Physical Properties
| Arc Resistance | 180 sec |
| Creep Distance | Insulator Height |
| Height Tolerance | +/-0.015 Inch |
Documentos
No Documents Found