Delfingen Nu-Sleeve VPI-200 Class H Grade A Silicone Rubber Coated Sleeving, 1 AWG, 3', Natural, MFR ID ACRVPOB20001NLJ
- MFR #137397
- EIS #ACRVPOB20001NLJ
- Series #Nu-Sleeve™ VPI-200-A
$165.22 / 100Foot
In Stock | Ready to Ship
Refine your product below or compare all choices in the
Min QTY1QTY Increment1
more info
| Stock Status | ||||
|---|---|---|---|---|
 | 3 ft | 0.375 Inch | $ / Foot more info | |
| 3 ft | 0.625 Inch | $ / Foot more info | |
| 3 ft | 0.5 Inch | $ / Foot more info | |
| 100 ft | 0 AWG | $ / Foot more info | |
| 3 ft | 0.437 Inch | $ / Foot more info | |
| 36 ft | 6 AWG | $ / Foot more info |
Nu-Sleeve VPI-200 is a double wall coated fiberglass sleeving. It is made by applying a layer of silicone rubber to a braided electrical grade fiberglass substrate to produce a Grade A silicone rubber coated fiberglass sleeving. Has excellent electrical properties, excellent heat stability and is designed to wick-in and retain resins for added dielectric and mechanical properties without the excessive bulk. The sleeving is then overbraided with a 3-ply fiberglass MIL-Y-1140H yarn to provide a high degree of abrasion resistance and saturability for vacuum pressure impregnation.
Applications
- Coil and Winding Industry (Coils, Motors, Generators, Transformers)
- Wind Turbines and Solar Panels
- Industrial Fields
Features
- Features high dielectric protection, maximum flexibility for ease of installation, improved abrasion resistance, non-slip bond between layers and has a minimum dielectric strength of 8000V
- High degree of saturability for vacuum pressure impregnation
- Excellent electrical properties
- Excellent heat stability
- High dielectric protection
- Maximum flexibility for ease of installation
- Improved abrasion resistance
- Dielectric Grade: A
- Dielectric Strength: Up to 15 kV
- Temperature Rating: -70 to 220 °C
- Volume Resistivity: 6.2 Ohm-cm x 10^14 Ohm-cm
General Information
| Item Name | Silicone Rubber Coated Sleeving |
| Trade Name | Nu-Sleeve™ VPI-200 |
| Series | Nu-Sleeve™ VPI-200-A |
Design & Construction
| Braid Type | Fiberglass, Over-Braided |
| Color | Natural |
| Grade | A |
| Insulation Material | Silicone Rubber |
| Insulation Type | Class H |
| Insulation Coating Type | Silicone |
| Material | Silicone VPI Overbraid |
| NEMA Specification | NEMA TF 1 Type 6 |
Performance Details
| Flame Retardant | Yes |
| Tensile Strength | 8.3 Mpa |
Electrical Properties
| Dielectric Grade | Grade A+ |
| Dielectric Strength | 15000 V |
Physical Properties
| Elongation | 410% |
| Gauge | 1 AWG |
| Hardness | 340 Shore A |
| Inside Diameter | 0.3 Inch |
| Length | 3 ft |
| Wall Thickness | NEMA TF-1 |
Environmental Condition
| Temperature Rating | -70 to 220 °C |
Documents
No Documents Found