Delfingen Nu-Sleeve SG-200 Class H Grade C Silicone Rubber Coated Sleeving, 10 AWG, 250' Per Spool, White, MFR ID SRC-110WFJ
- MFR #122961
- EIS #SRC-110WFJ
- Series #Nu-Sleeve™ SG-200-C-1
$27.33 / 100Foot
In Stock | Ready to Ship
Refine your product below or compare all choices in the
Min QTY1QTY Increment1
more info
| Stock Status | |||||
|---|---|---|---|---|---|
 | 250 ft | 4 AWG | White | $ / Foot more info | |
| 250 ft | 5 AWG | White | $ / Foot more info | |
| 250 ft | 6 AWG | White | $ / Foot more info | |
| 250 ft | 3 AWG | White | $ / Foot more info | |
| 250 ft | 8 AWG | Red | $ / Foot more info | |
| 250 ft | 8 AWG | White | $ / Foot more info |
Nu-Sleeve SG-200 is a braided fiberglass sleeve coated with a liquid silicone rubber. The braid is heat treated to optimize coating adhesion and minimize surface irregularities. Nu-Sleeve SG-200 is available in 5 electrical grades (A, B, C-1 , C-2 and C-3) . It is highly resistant to end-fray and coating fractures and is a non-flammable sleeve.
Applications
- Coil and Winding Industry (Coils, Motors, Generators, Transformers)
- Lighting Fixtures
- Transportation (Mass Transit, Rail Cars, Locomotives)
- Recreational Vehicles
- Pleasure Boats and Commercial Marine
- Industrial Equipment (Tow Motors, Overhead Cranes, Aerial Platforms)
Features
- Nu-Sleeve SG-200 is the ideal choice for high stress applications over a wide temperature range from -55 °C (-67 °F) up to 200 °C (392 °F)
- It is used extensively in high-temperature applications where one or more of the following features are required: flexibility, expandability, abrasion resistance, cut through resistance and chemical resistance
- Self-extinguishing with removal of flame source rate of burning
- Dielectric Grade: C-1
- Dielectric Strength: Dry: 8000 Volt, 60 Hz AC at 500 V/s Rate of Rise, Wet: >80% of the Dry Values
- Length: 250 ft Per Spool
- Volume Resistivity: 6.1 Ohm-cm x 10^13 Ohm-cm
- Temperature Rating: -55 to 200 °C
General Information
| Item Name | Silicone Rubber Coated Sleeving |
| Trade Name | Nu-Sleeve™ SG-200 |
| Series | Nu-Sleeve™ SG-200-C |
Design & Construction
| Braid Type | Fiberglass |
| Color | White |
| Grade | C |
| Insulation Material | Silicone Rubber |
| Insulation Type | Class H |
| Insulation Coating Type | Silicone |
| Material | Silicone Coated Fiberglass |
| NEMA Specification | NEMA TF 1 Type 5 |
Performance Details
| Flame Retardant | Yes |
| Heat Aging | 136 hr |
| Tensile Strength | 8.3 Mpa |
Electrical Properties
| Dielectric Grade | Grade C |
| Dielectric Strength | 2500 V |
Physical Properties
| Elongation | 420% |
| Gauge | 10 AWG |
| Hardness | 37 Shore A |
| Inside Diameter | 0.107 Inch |
| Length | 250 ft |
| Wall Thickness | NEMA TF-1 |
Environmental Condition
| Temperature Rating | -55 to 200 °C |