Delfingen Nu-Sleeve SG-200 Class H Grade A Silicone Rubber Coated Sleeving, 10 AWG, 250' Per Spool, Black, MFR ID SRA10BFJ
MFR #:122469
EIS #:SRA10BFJ
Series #:Nu-Sleeve™ SG-200-A
MFR #:122469
EIS #:SRA10BFJ
Series #:Nu-Sleeve™ SG-200-A
In Stock | Ready to Ship
Min Qty:1
|Qty Increment:1
Nu-Sleeve SG-200 is a braided fiberglass sleeve coated with a liquid silicone rubber. The braid is heat treated to optimize coating adhesion and minimize surface irregularities. Nu-Sleeve SG-200 is available in 5 electrical grades (A, B, C-1 , C-2 and C-3) . It is highly resistant to end-fray and coating fractures and is a non-flammable sleeve.
$33.72 / 100Foot
Min Qty:1
|Qty Increment:1
Nu-Sleeve SG-200 is a braided fiberglass sleeve coated with a liquid silicone rubber. The braid is heat treated to optimize coating adhesion and minimize surface irregularities. Nu-Sleeve SG-200 is available in 5 electrical grades (A, B, C-1 , C-2 and C-3) . It is highly resistant to end-fray and coating fractures and is a non-flammable sleeve.
Product Options
Showing 8 out of 76 options
 | Length: 500 ft | Gauge: 24 AWG | Color: White | EIS Part #: SRA24WHJ | $ / Foot | |
| Length: 500 ft | Gauge: 24 AWG | Color: Black | EIS Part #: SRA24BHJ | $ / Foot | |
| Length: 500 ft | Gauge: 22 AWG | Color: Natural | EIS Part #: SRA22NHJ | $ / Foot | |
| Length: 500 ft | Gauge: 22 AWG | Color: Black | EIS Part #: SRA22BHJ | $ / Foot | |
| Length: 500 ft | Gauge: 20 AWG | Color: Natural | EIS Part #: SRA20NHJ | $ / Foot | |
| Length: 500 ft | Gauge: 20 AWG | Color: Black | EIS Part #: SRA20BHJ | $ / Foot | |
| Length: 4 ft | Gauge: 2 Inch | Color: Natural | EIS Part #: SRA2.0NLJ | $ / Foot | |
| Length: 3 ft | Gauge: 2 Inch | Color: Black | EIS Part #: SRA2.0BLJ | $ / Foot |
- Attributes
- Applications
- Features
- Documents
Attributes
General Information
Item NameSilicone Rubber Coated Sleeving
Trade NameNu-Sleeve™ SG-200
SeriesNu-Sleeve™ SG-200-A
Design & Construction
Braid TypeFiberglass
ColorBlack
GradeA
Insulation MaterialSilicone Rubber
Insulation TypeClass H
Insulation Coating TypeSilicone
MaterialSilicone Coated Fiberglass
NEMA SpecificationNEMA TF 1 Type 5
Performance Details
Flame RetardantYes
Heat Aging136 hr
Tensile Strength8.3 Mpa
Electrical Properties
Breakdown Voltage5000 V
Dielectric GradeGrade A
Dielectric Strength8000 V
Physical Properties
Elongation420%
Gauge10 AWG
Hardness37 Shore A
Inside Diameter0.107 Inch
Length250 ft
Wall ThicknessNEMA TF-1
Environmental Condition
Temperature Rating-55 to 200 °C
Applications
- Coil and Winding Industry (Coils, Motors, Generators, Transformers)
- Lighting Fixtures
- Transportation (Mass Transit, Rail Cars, Locomotives)
- Recreational Vehicles
- Pleasure Boats and Commercial Marine
- Industrial Equipment (Tow Motors, Overhead Cranes, Aerial Platforms)
Features
- Nu-Sleeve SG-200 is the ideal choice for high stress applications over a wide temperature range from -55 °C (-67 °F) up to 200 °C (392 °F)
- It is used extensively in high-temperature applications where one or more of the following features are required: flexibility, expandability, abrasion resistance, cut through resistance and chemical resistance
- Self-extinguishing with removal of flame source rate of burning
- Dielectric Grade: A
- Dielectric Strength: Dry: 8000 Volt, 60 Hz AC at 500 V/s Rate of Rise, Wet: >80% of the Dry Values
- Breakdown Voltage: 5000 - 7000V
- Length: 250 ft Per Spool
- Volume Resistivity: 6.1 Ohm-cm x 10^13 Ohm-cm
- Temperature Rating: -55 to 200 °C