Elantas E-8112 Epoxylite® Two-Part High Temperature Potting Compound
- MFR #E-8112
- EIS #PH11-E-8112
- Series #E-8112
$382.95 - $922.24
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack--
| Stock Status | |||
|---|---|---|---|
 | 0.219 lb | $ / Kit |
Epoxylite E 8112 hi-temp epoxy is a heat-cured, two-component system consisting of a viscous liquid resin and a finely divided powder hardener. It is provided in pre-measured kits. Epoxylite resins are used in overcoating and impregnation of armatures, stators and coils in motors and generators. - Epoxylite E 8112 hi temp epoxy products are filled and sold by weight and may contain less than the nominal volume of the container. Maintains excellent electrical and physical properties to at least 260 °C / 500 °F.
Features
- Withstands temperatures in excess of 316 °C / 600 °F for short periods
- Excellent adhesion to metals, ceramics and most plastics
- Resistant to acids, alkalis and solvents
Applications
- For Potting and Sealing of Electrical and Electronic Components Requiring Resistance to High Temperatures
General Information
| Item Name | Potting Compound |
| Trade Name | Epoxylite® |
| Series | E-8112 |
General Features
| Type | Two-Part, High Temperature |
| Standards | OSHA Approved, 29 CFR 1910.94 Certified |
| Storage Temperature | Below 25 °C |
Design & Construction
| Form - Part-A | Liquid |
| Form - Part-B | Powder |
Performance Details
| Full Cure Time | See TDS |
Electrical Properties
| Dielectric Strength | 560V/Mil |
Physical Properties
| Container Type | Kit |
| Hardness | 90 Shore D |
Supporting Information
| Application Method | Bench Casting, Vacuum Casting |
Documents
No Documents Found