North American Electric 460V F1 Rigid Base Totally Enclosed Fan-Cooled (TEFC) Heavy Duty Cast Iron Ball Inverter Duty Motor, MFR ID NA-460-RBF1-TEFC-HDCI-IDM-BB
- MFR #NA-460-RBF1-TEFC-HDCI-IDM-BB
- EIS #PH23-NA-460-RBF1-TEFC-HDCI-IDM-BB
$12,132.75 - $24,867.21
Refine your product below or compare all choices in the
Cantidad mínima1QTY Increment1
more info
Paquete--Products You May Also Like
| Stock Status | ||||
|---|---|---|---|---|
 | 125 HP | 444 | $ / Piece |
Suitable for wye-delta start on 213T frame and above. Dual voltage ratings suitable for part wind start on lower voltage. Inverter Rated (10:1 variable torque, 5:1 constant torque). Vacuum Pressure Impregnation for all windings. Sealed bearings thru 215T frame, Regreasable open bearings 254T frame and above. Mechanical "V" Seal on drive end. Class F insulation system, class B rise at full load. Corrosion resistant paint - Stainless steel nameplate and zinc plated hardware. Feet are dual drilled on most frames for mounting flexibility. NEMA Design C performance. C-flange and D-flange field conversion kits available. Condensation drains with plastic plugs. IP55 Protection - terminal box is sealed for IP66 protection. NEMA Premium® Efficiency. Inverter duty motor.
Features
- Voltage rating: 460V at 60 Hz, 380V at 50 Hz
- Frequency Rating: 50/60 Hz
- Service factor: 1.15 at 60 Hz, 1 at 50 Hz
Applications
- General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed in damp, dusty or dirty environments
General Information
| Item Name | Inverter Duty Motor |
| Series | NA-460-RBF1-TEFC-HDCI-IDM-BB |
General Features
| Standards | CSA + CE + US Certification, ISO 9001 Certification, Meets or exceeds EISA Efficiency, Class I, Div II Groups ABCD, T2B, Meets or exceeds NEMA Premium® NEMA MG-1, Table 12-12 |
Design & Construction
| Bearing Type | Ball |
| Construction | Heavy Duty Cast Iron |
| Duty | Continuous |
| Enclosure Type | Totally Enclosed Fan-Cooled |
| Insulation Type | Class F |
| KVA Code | G |
| Mounting Type | Rigid Base, F1 |
| Rotation | Reversible |
| Seal Type | V |
Performance Details
| Speed Rating | 1800 rpm |
Electrical Properties
| Frequency Rating | 50 Hz |
| Full Load Power Factor | 87% |
| Phase | 3-Phase |
| Service Factor | 1.0 |
| 3/4 Load Power Factor | 86% |
| Voltage Rating | 460 V |
Physical Properties
| Shaft Diameter | 3.375 Inch |
| Shaft Length | 8.5 Inch |
Environmental Condition
| Temperature Rating | 40 °C |
Documentos
No Documents Found