Elantas PDG Epoxylite® Insul-Spray™ 7001 Air-Drying Insulating Enamel
- MFR #Epoxylite® Insul-Spray™ 7001
- EIS #PH21-Epoxylite Insul-Spray 7001
$40.29 - $69.85
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack--
| Stock Status | |||
|---|---|---|---|
 | Green | $ / each | |
| Red | $ / Can | |
| Black | $ / each |
Epoxylite® INSUL-Spray™ 7001 epoxy ester insulating resin that does not require a catalyst and provides outstanding chemical resistance properties. This resin cures to a hard, glossy, flexible film providing good adhesion and high dielectrics. - Epoxylite® Insul-Spray™ 7001 is a line of solvent-borne, air-drying, modified epoxy enamels, secondary insulation.
Features
- High dielectric strength
- Glossy finish
- Tough, flexible film
- Excellent adhesion
- Resistant to moisture, acids, alkalis and chemicals
- Suitable for class 155 service
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 1.0 - 1.5 Mil recommended dry film thickness
- 70 minimum gloss
- Spray application method
- Secondary insulation
- Dielectric Strength: >1000 V/Mil
- Density: 0.8 g/cm3 (20 °C (68 °F)) (1.013 hPa)
- Flash Point: -18 °C
Applications
- Exterior Coating for Electrical Windings Requiring Additional Protection from Moisture and Corrosive Environments
General Information
| Item Name | Insulating Enamel |
| Trade Name | Epoxylite® Insul-Spray™ |
| Series | Epoxylite® Insul-Spray™ 7001 |
General Features
| Shelf Life | 12 Months |
| Type | Air-Drying |
Performance Details
| Full Cure Time | 8 - 24 hr at 25 °C/77 °F |
Electrical Properties
| Dielectric Strength | 1000 V/mil |
Physical Properties
| Container Size | 12.5 Oz |
| Container Type | Aerosol Can |
| Odor/Scent | Ether-Like |