MFR #:LOC-4011
EIS #:PH11-LOC-4011
Series #:4011
MFR #:LOC-4011
EIS #:PH11-LOC-4011
Series #:4011
Loctite 4011 is designed for the assembly of difficult-to-bond materials which require uniform stress distribution and strong tension and/or shear strength. Loctite 4011 is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric. Suitable for use in the assembly of disposable medical devices. The product provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. - Loctite 4011 Prism low viscosity, one-part, room temperature cure, surface insensitive instant adhesive. Designed for the assembly of difficult-to-bond materials which require uniform stress distribution. Particularly suited for bonding a wide range of materials, including metals, plastics and elastomers. ISO-10993 Biological Tested for medical device use.
$48.26
- $532.63
Select from the options below
Loctite 4011 is designed for the assembly of difficult-to-bond materials which require uniform stress distribution and strong tension and/or shear strength. Loctite 4011 is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric. Suitable for use in the assembly of disposable medical devices. The product provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. - Loctite 4011 Prism low viscosity, one-part, room temperature cure, surface insensitive instant adhesive. Designed for the assembly of difficult-to-bond materials which require uniform stress distribution. Particularly suited for bonding a wide range of materials, including metals, plastics and elastomers. ISO-10993 Biological Tested for medical device use.
Product Options
Showing 2 out of 2 options
Container Size: 1 lb | EIS Part #: LOC18681 | $ / Piece Pack: 10/Case | ||
Container Size: 20g | EIS Part #: LOC18680 | $ / each Pack: 10/Case |
- Attributes
- Applications
Attributes
General Information
Item NameInstant Adhesive
Trade NamePrism®
Series4011
General Features
StandardsOSHA Approved, 29 CFR 1910.1200 Certified
Storage Temperature2 to 8 °C
Design & Construction
ColorColorless to Light Yellow
Cure TypeHumidity Cure, Moisture Cure
FormLiquid
Performance Details
Shear StrengthSee TDS
Tensile StrengthSee TDS
Application Time<1 - 45 sec
Full Cure Time1 Week at 22 °C
Chemical Properties
CompositionEthyl Cyanoacrylate
Specific Gravity1.05
ViscositySee TDS
VOC<20g/L
Electrical Properties
Dielectric Strength33kV/mm
Physical Properties
Container TypeBottle
Odor/ScentIrritating
Supporting Information
Applicable MaterialsMetals, Plastics and Elastomers
Applications
- For Disposable Medical Devices