North American Electric PEXP184T-5-4 Explosion Proof Motor, 5 HP, 1800 RPM, 184T Frame, 208-230/460V, 3PH, NEMA Design B, 60HZ, 1.15 S.F., TEXP, Explosion Proof, Cast Iron, Prem Eff, Inverter Rated
MFR #:PEXP184T-5-4
EIS #:PEXP184T-5-4
MFR #:PEXP184T-5-4
EIS #:PEXP184T-5-4
Low Stock
Min Qty:1
|Qty Increment:1
5 HP, Service factor: 1.15 @ 60 Hz, 1.0 @ 50 Hz, NEMA Design B Performance, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions, Class F insulation system, Class B rise at full load, Class H vacuum pressure impregnation (VPI) resin for all windings, Stainless steel nameplate and zinc plated hardware, corrosion resistant epoxy paint, IP55 protection, Cast iron frame construction - Three-phase, 5 HP, Totally enclosed explosion proof (TEXP), 143T-365T frame, Service factor: 1.15 @ 60 Hz, 1.0 @ 50 Hz, NEMA Design B Performance, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions
$1,515.80 / Piece
Min Qty:1
|Qty Increment:1
5 HP, Service factor: 1.15 @ 60 Hz, 1.0 @ 50 Hz, NEMA Design B Performance, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions, Class F insulation system, Class B rise at full load, Class H vacuum pressure impregnation (VPI) resin for all windings, Stainless steel nameplate and zinc plated hardware, corrosion resistant epoxy paint, IP55 protection, Cast iron frame construction - Three-phase, 5 HP, Totally enclosed explosion proof (TEXP), 143T-365T frame, Service factor: 1.15 @ 60 Hz, 1.0 @ 50 Hz, NEMA Design B Performance, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions
- Attributes
- Features
Attributes
General Information
Item NameExplosion Proof Motor
General Features
StandardsUL Listed, CSA + C + US Certification
Net Weight183 lb
Design & Construction
Bearing TypeBall
Frame Type184T
KVA CodeJ
Performance Details
Speed Rating1800 rpm
Full Load Efficiency88.4% at 50Hz, 89.5% at 60Hz
1/2 Load Efficiency87%
3/4 Load Efficiency89.2%
Torque Rating14.9 lb-ft
Electrical Properties
Full Load Ampere15.5 A
Full Load Power Factor81%
1/2 Load Power Factor66%
HP Rating5 HP
Locked Rotor Ampere46 A
3/4 Load Power Factor75%
Physical Properties
Dimensions17.1 Inch L x 10.7 Inch H
Frame Size184.0
Number of Poles4
Shaft Diameter1.125 Inch
Shaft Length2.75 Inch
Weight183 lb
Features
- Meets or exceeds NEMA Premium� Efficiency Requirements defined by NEMA MG-1, Table 12-12
- Lifting provisions on 143T frame and above
- IP55 degree of protection
- Class I, Division I, Groups C and D and Class II, Division I, Groups E, F and G
- Dual voltage ratings suitable for part wind start on lower voltage
- Vacuum pressure impregnation for all windings
- Stainless steel nameplate and zinc plated hardware
- Feet are dual drilled for mounting flexibility
- NEMA design B performance
- Severe duty conversion kit available
- C-flange field conversion kits available
- 87.5 minimum efficiency
- Frequency Rating: 50/60�Hz
- Full Load Ampere: 15.5 -�14/7A at 208 - 230/460V, 14.5/7.3A at 190/380V
- Service Factor: 1.15 at 60Hz, 1 at 50Hz
- Torque Rating: 14.9 lb-ft (Full Load), 225 lb-ft (Break Down), 185 lb-ft (Locked Rotor)
- Voltage Rating: 208 - 230/460V at 60Hz, 190/380V at 50Hz