Elantas PDG Epoxylite® E478-LV Single-Component Epoxy VPI Resin
- MFR #:Epoxylite® E478-LV
- EIS #:PH21-Epoxylite E478-LV
- MFR #:Epoxylite® E478-LV
- EIS #:PH21-Epoxylite E478-LV
Elantas PDG Epoxylite® E478-LV Single-Component Epoxy VPI Resin, Epoxy Base Type, 1.1413 g/cm3 (77 °F (25 °C)) Density, 4200 V/Mil At 0.3 Mil - 25 °C/77 °F, 3800 V/Mil At 0.3 Mil - 25 °C/77 °F (After 24 hr in Water) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 6 hr At 149 °C/300 °F or 4 hr At 163 °C/325 °F Full Cure Time, 4 - 6 min At 150 °C/302 °F (Sunshine) Gel Time, 85 Shore D At 25 °C/77 °F Hardness, 900 - 2200 CP At 25 °C/77 °F Viscosity. - Epoxylite® E 478 LV is a single-component, heat-cured, 100% solids epoxy impregnating resin, secondary insulation.
$40.82
- $44.36
Select from the options below
Elantas PDG Epoxylite® E478-LV Single-Component Epoxy VPI Resin, Epoxy Base Type, 1.1413 g/cm3 (77 °F (25 °C)) Density, 4200 V/Mil At 0.3 Mil - 25 °C/77 °F, 3800 V/Mil At 0.3 Mil - 25 °C/77 °F (After 24 hr in Water) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 6 hr At 149 °C/300 °F or 4 hr At 163 °C/325 °F Full Cure Time, 4 - 6 min At 150 °C/302 °F (Sunshine) Gel Time, 85 Shore D At 25 °C/77 °F Hardness, 900 - 2200 CP At 25 °C/77 °F Viscosity. - Epoxylite® E 478 LV is a single-component, heat-cured, 100% solids epoxy impregnating resin, secondary insulation.
Product Options
Showing 2 out of 2 options
 | Container Size: 480 lb | EIS Part #: E478LV480LB | $ / US pound | |
| Container Size: 45 lb | EIS Part #: E478LV45LB | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy VPI Resin
Trade NameEpoxylite®
SeriesEpoxylite® E478-LV
General Features
Net Weight9.3 - 9.7 lb/gal
Shelf Life12 Months
TypeSingle-Component
Design & Construction
Base TypeEpoxy
FormLiquid
Performance Details
Full Cure Time6 hr at 149 °C/300 °F or 4 hr at 163 °C/325 °F
Gel Time4 min
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity900 cP
Electrical Properties
Dielectric Strength4200 V/mil
Physical Properties
Hardness85 Shore D at 25 °C/77 °F
Features
- The industry standard for the medium voltage power generation industry and navy and commercial rewinding operations
- Chemical resistant for operation in corrosive environments
- Refrigerant-resistant for hermetic service
- No separate catalyst required
- UL recognized insulation systems up to class 180
- Vacuum-pressure impregnation, vacuum impregnation application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 0.3 pounds/gallon (ASTM D 6053) volatile organic content
- 92 °C (DSC) glass transition temperature
- 70 ppm / °C (below Tg), 210 ppm / °C (above Tg) coefficient of thermal expansion
- > 1 x 10^16 ohm-cm (ASTM D257 - 25 °C / 77 °F) volume resistivity
- 3.3 at 1 kHz - 25 °C / 77 °F, 3.5 at 1 kHz - 100 °C / 212 °F, 4.7 at 1 kHz - 150 °C / 302 °F dielectric constant (ASTM D150)
- 0.004 at 1 kHz - 25 °C / 77 °F, 0.01 at 1 kHz - 100 °C / 212 °F, 0.16 at 1 kHz - 150 °C / 302 °F dissipation factor
- < 1.0% (NEMA RE-2) freon extractable material
- Gel Time: 4 - 6 min
- Viscosity: 900 - 2200 cP
Applications
- Impregnation of Medium Voltage Motors and Generators (< 7 kV) Using Uncatalyzed Tapes as Well as Random Wound Motors