Elantas PDG RanVar™ TR315A&B Two-Component Epoxy Adhesive/Sealant Resin, 24 lb, Red/Amber, MFR ID RANTR315A/B24K
- MFR #119895
- EIS #RANTR315A/B24K
$1,000.78 / Kit
In Stock | Ready to Ship
Min QTY1QTY Increment1more info
Elantas PDG RanVar™ TR315A&B Two-Component Epoxy Adhesive/Sealant Resin, Epoxy Base Type, Red - Part-A, Amber - Part-B, Room Temperature Cure Type, 10 - 12% At Break (ASTM D229) Elongation, >94 °C (ASTM D93) Flash Point, Within 12 - 16 hr Full Cure Time, 6 - 10 min At 110 °C/230 °F Gel Time, 67 Shore D Hardness, 100 (Parts By Weight And Volume) Resin, 100 (Parts By Weight), 113 (Parts By Volume) Hardener Mixing Ratio, >9000 psi (ASTM D229) Tensile Strength, 22 mm2/s (104 °F (40 °C)) Kinematic Viscosity. - RanVar™ TR-315 Red is a two component, room temperature curing, 100% solids epoxy system.
Features
- Convenient 1:1 volume mix ratio
- Thixotropic / non-slumping
- Low shrinkage
- Long pot life
- Chemical and moisture resistant
- Suitable for class 155 use
- Brush, spatula or putty knife application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 4.3 x 10^13 ohm-cm (ASTM D257 - 25 °C / 77 °C) volume resistivity
- 4.7 at 1 kHz - 25 °C / 77 °F dielectric constant
- 0.04 at 1 kHz - 25 °C / 77 °F dissipation factor
- 0.2% (24 hours at 25 °C / 77 °F) water absorption
- 0.95% (24 hours at 180 °C / 356 °F) weight loss
- 1-1/2 - 2 hr at 25 °C / 77 °F - 250g pot life
- Gel Time: 6 - 10 min at 110 °C/230 °F
- Flash Point: >94 °C (ASTM D93)
- Viscosity: 22 mm2/s/104 °F/40 °C) Kinematic
- Tensile Strength: >9000 psi (ASTM D229)
- Gel Time: 6 - 10 min
Applications
- Sealant for Armature and Stator End Windings, Bus Bar Coating, General Sealing and Patching of Electrical Equipment
General Information
| Item Name | Epoxy Adhesive/Sealant Resin |
| Trade Name | RanVar™ |
| Series | RanVar™ TR315A&B |
General Features
| Net Weight | 14.1 - 14.5 lb/gal Resin , 12.9 - 13.3 lb/gal Hardener |
| Shelf Life | 12 Months |
| Type | Two-Component |
Design & Construction
| Base Type | Epoxy |
| Color - Part-A | Red |
| Color - Part-B | Amber |
| Cure Type | Room Temperature |
| Form | Liquid |
Performance Details
| Full Cure Time | Within 12 - 16 hr |
| Gel Time | 6 min |
| Tensile Strength | 9000 psi |
Technical Details
| Flash Point | 94 °C |
Chemical Properties
| Mixing Ratio | 100 (Parts By Weight and Volume) Resin, 100 (Parts By Weight), 113 (Parts By Volume) Hardener |
Physical Properties
| Container Size | 24 lb |
| Elongation | 10 - 12% at Break (ASTM D229) |
| Hardness | 67 Shore D |