Leeson SCR Rated Totally Enclosed Non-Ventilated (TENV) DC Gearmotor, MFR ID M113-SCR
- MFR #M113-SCR
- EIS #PH23-M113-SCR
- Series #M113-SCR
$975.01 - $1,197.44
Refine your product below or compare all choices in the
Cantidad mínima1QTY Increment1
more info
Paquete--Why Buy From EIS?
- Authorized Distributor
- Fast Shipping
- Technical Support Available
Products You May Also Like
Products You May Also Like
| Stock Status | |||||
|---|---|---|---|---|---|
 | 180 V | 0.125 HP | 250 rpm | $ / each | |
| 90 V | 0.25 HP | 83 rpm | $ / each |
Precision machined aluminum gear housing. Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation. Lubrication is permanent with an oil bath. Gearbox has all ball bearings. Output shaft is field interchangeable from left hand to right hand style by reassembly. Double output shaft available as a factory option. Performance matched for continuous duty service over 60:1 speed range. These right-angle gearmotors have a lubrication breather positioned for horizontal mounting. For other mountings, the breather plug must be reoriented by using a 90 degree 1/8 inch NPT taper pipe elbow. - Leeson SCR Rated DC Gear Motor, Bearing Type: Ball, Duty: Continuous, Enclosure Type: Totally Enclosed Non-Ventilated, Frame Size: 34, Gear Material: Aluminum, Gearing Arrangement: Worm Gear, Insulation Type: Class H3, Material: Steel, Overload Protector: No, Rotation: Reconnect, Service Factor: 1, Shaft Diameter: 0.625 Inch, Shaft Position: Right-Angle, Temperature Rating: 40 °C.
Features
- Constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable speed control having a typical form factor of 1.3 to 1.4
- Service factor: 1 at 60 Hz
Applications
- For mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail
General Information
| Item Name | DC Gear Motor |
| Series | M113-SCR |
General Features
| Type | SCR Rated |
| Standards | UL Listed, CSA Approved, CE Certified |
Design & Construction
| Bearing Type | Ball |
| Duty | Continuous |
| Enclosure Type | Totally Enclosed Non-Ventilated |
| Gearing Arrangement | Worm Gear |
| Gear Material | Aluminum |
| Insulation Type | Class H3 |
| Material | Steel |
| Rotation | Reconnect |
| Shaft Position | Right-Angle |
Performance Details
| Over-Hung Load | 235 lb |
| Overload Protector | No |
Electrical Properties
| Service Factor | 1 |
Physical Properties
| Frame Size | 34 |
| Shaft Diameter | 0.625 Inch |
Environmental Condition
| Temperature Rating | 40 °C |
Documentos
No Documents Found