Leeson 13 DC Gearmotor, 1/4 HP, 250 rpm, 90VDC Armature, 32 Frame, TENV, MFR ID M1125279
- MFR #M1125279.00
- EIS #MOTM1125279
$1,439.45 / Piece
Existencias bajas
Cantidad mínima1QTY Increment1
more info
Leeson DC Gearmotor, Ball Bearing, Continuous Duty, Totally Enclosed Non-Ventilated Enclosure, Class F3 Insulation, Service Factor: 1, Horizontal Shaft, 40 deg C Ambient.
Leeson Washguard® Right Angle Shaft Totally Enclosed Non-Ventilated (TENV) DC Gearmotor
Features
- 303 stainless steel gearbox output shaft
- Frame, end shields, armature and interior components protected by enamel and polyester compounds for resistance to moisture, acids, alkalies and oil
- Cast conduit box with threaded conduit holes and Nitrile gaskets keep water out
- Conduit box cover is made from 304 stainless steel
- For any condensation that may accumulate inside the motor, a one-way stainless steel vapor vent is provided
- All hardware is stainless steel
- Painted with white epoxy for superior corrosion resistance and protection
- Machined fits between the end bells and motor frame are sealed with gaskets
- Thru-bolt heads and nuts sealed with fiber washers
- O-rings under each threaded brush cover
- Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation
- Precision machined aluminum gear housing
- Lubrication is permanent with an oil bath, gearbox has all ball bearings
- Output shaft is field interchangeable from left hand to right hand style by reassembly
- Temperature Rating: 40 °C Ambient
- Double output shaft available as a factory option, performance matched for continuous duty service over 60:1 speed range, Constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable speed control having a typical form factor of 1.3 to 1.4
- Full load ampere: 3.7A at 90VDC
General Information
| Item Name | DC Gear Motor |
| Trade Name | Leeson |
General Features
| Type | DN, Right Angle Shaft, SCR Rated |
| Standards | UL Listed, CSA Certified, CE Certified, IP55 |
Design & Construction
| Bearing Type | Ball |
| Duty | Continuous |
| Enclosure Type | Totally Enclosed Non-Ventilated |
| Gearhead Type | 13F10-32 |
| Gear Material | Aluminum |
| Insulation Type | Class F3 |
| Shaft Position | Horizontal |
Performance Details
| Speed Rating | 250 rpm |
| Over-Hung Load | 235 |
| Torque Rating | 50 lb-Inch |
Electrical Properties
| Armature Voltage | 90 VDC |
| Full Load Ampere | 3.7 A |
| HP Rating | 0.25 HP |
| Service Factor | 1 |
Physical Properties
| Dimensions | 12.86 Inch L x 3.8 Inch W x 6.6 Inch H |
| Frame Size | 32 |
| Shaft Length | 1.8 |
Documentos
No Documents Found