MFR #:3022
EIS #:ESOLDER30222OZ
MFR #:3022
EIS #:ESOLDER30222OZ
In Stock
Min Qty:1
|Qty Increment:1
Pack:6/Carton
Hazardous Materials require special handling.
WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Typical applications of E-Solder 3022 are lead terminations, printed circuits and shielding on bases which will not withstand the elevated temperatures required for fired-on coatings or solders. E-Solder 3022 is an epoxy silver paste recommended for applications requiring low electrical resistance and good adhesive properties. E-Solder 3022 requires the addition of Hardener No. 18 to harden and cure. E-Solder 3022 may be cured at room temperature, however the application of heat will accelerate and shorten the cure time.
$793.05 / Kit
Pack: 6/Carton
Min Qty:1
|Qty Increment:1
Pack:6/Carton
Hazardous Materials require special handling.
WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Typical applications of E-Solder 3022 are lead terminations, printed circuits and shielding on bases which will not withstand the elevated temperatures required for fired-on coatings or solders. E-Solder 3022 is an epoxy silver paste recommended for applications requiring low electrical resistance and good adhesive properties. E-Solder 3022 requires the addition of Hardener No. 18 to harden and cure. E-Solder 3022 may be cured at room temperature, however the application of heat will accelerate and shorten the cure time.
- Attributes
Attributes
General Information
Item NameConductive Adhesive
Trade NameE-Solder®
General Features
Shelf Life4 Months
Storage Temperature25 °C
Design & Construction
ColorSilver
FormPaste
Performance Details
Adhesive Strength2030 psi
Application Time1 - 2 hr
Full Cure TimeSee TDS
Tensile Strength2 psi at 25 °C
Chemical Properties
CompositionEpoxy
Specific Gravity2.2
Physical Properties
Container Size2 oz
Container TypeKit
Environmental Condition
Temperature Rating150 °C