Martindale Electric BRSRX27FH Brush Seater, 8" L x 1-1/2" W x 1-1/2" T, Fine Hard, 1/Box
- MFR #BRSRX27
- EIS #MARTINBRSRX27FH
$169.85 / Piece
Pack: 1/Box
Available to Order
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack1/Box
| Stock Status | |||||
|---|---|---|---|---|---|
 | 2 Inch | 3 Inch | Fine Soft | $ / Piece | |
| 2 Inch | 3 Inch | Medium Soft | $ / Piece Pack: 1/Box | |
| 1.5 Inch | 1.5 Inch | Fine Hard | $ / Piece Pack: 1/Box |
Commutators and slip ring brushes of any material can be easily and accurately seated with diamond D brush seaters. Just hold the brush seater on the commutator close to the brush so the brush seater material will be carried under the brush. At the same time, press on the brush to increase pressure. Many commutators and slip-ring troubles are caused by poor contact with the brushes. - This is particularly true when new brushes are installed along with old ones because if the new brushes do not make good contact, the current is forced through the other brushes. This overloads the other brushes causing pitting of the brush faces, loosening of brush shunts, burning of brush holders and many other evils that result from sparking and heating.
Features
- Brush seater holder adds an element of safety when seating brushes while the motor is running
- Non decreasing length of the holder helps keep fingers away from rotating equipment and possible shock is reduced because the holder is non-conductive
- This sheath also provides additional support to the relatively fragile seater material
Applications
- For General Purpose Applications
General Information
| Item Name | Brush Seater |
| Series | Martindale Brush Seater-8in |
Design & Construction
| Grade | Fine Hard |
Physical Properties
| Thickness | 1.5 Inch |
| Width | 1.5 Inch |
| Length | 8 Inch |
Supporting Information
| Use With | Commutator |
Documents
No Documents Found