ACL Staticide Dualmat 8285 Static Dissipative Table Mat
- MFR #8285
- EIS #PH13-8285
- Series #8285
$153.30 - $2,341.90
Refine your product below or compare all choices in the
Min QTY1QTY Increment1more infoPack--
| Stock Status | ||||
|---|---|---|---|---|
 | 60 Inch | 30 Inch | $ / Piece | |
| 72 Inch | 30 Inch | $ / Piece | |
| 96 Inch | 36 Inch | $ / Piece | |
| 40 ft | 36 Inch | $ / Roll | |
| 40 ft | 30 Inch | $ / Piece | |
| 40 ft | 24 Inch | $ / Piece |
Dualmat is a chemically cross-linked material with different electrical resistances on each side. Because it is inherently cross-linked the material will not delaminate and is volume conductive. The layers are permanently dissipative with polymers that will not lose electrical properties, will not exudate and more importantly will not outgas and contaminate clean room environments. The material is as durable as rigid laminates, and as comfortable and appealing as softer rubber or vinyl mats. It is suitable for use with constant monitor systems. - This ESD mat is a static dissipative industrial-grade elastomer designed for use on tables and other grounded work bench surfaces. Unlike the competition's surface dissipative mats, the electrical properties of the Dualmat are volume dissipative. This material was developed to conform to the most stringent ESD and lead-free requirements.
Features
- Embossed finish reduces glare and prevents parts from slipping
- 0.08 Inch thickness allows mat to remain flat and prevents curled edges
- 0.05 sec decay time ensures rapid, safe static drain
- Durable surface withstands high temperatures, solder, flux, and harsh chemicals
- Low out gassing and VOC
- No vinyl monomers or DOP ensures conformity to personal and environmental safety standards
- UV additives provide color stability and prevent fading
- 85 +/- 5 shore A hardness per ASTM D-2240
- Withstands soldering iron contact at 250 °F, can withstand environmental temperatures up to 600 °F
- 2.1 x 10^7 ohm resistance between two points (RTT) at 10V
- 6.1 x 10^7 ohm resistance between point-to-ground (RTG) at 10V
- 4.6 x 10^7 ohm-cm volume resistivity at 12% RH
- Ideal for cleanrooms and other controlled environments
Applications
- For use on Tables and other Grounded Work Bench Surfaces
General Information
| Item Name | Table Mat |
| Trade Name | Dualmat™ |
| Series | 8285 |
General Features
| Standards | ANSI/ESD S20.20, STM 7.1, ASTM F-150, NFPA-99, UL-779, EN 100015, DIN 51953 and IEC-61340-5-1 |
| Type | Static Dissipative |
Design & Construction
| Color | Royal Blue |
| Material | Elastomer |
Electrical Properties
| Resistance | 10^6 - 10^8 ohm |
Physical Properties
| Surface Pattern | Embossed |
| Thickness | 0.08 Inch |
Environmental Condition
| Resists | Abrasion |
Supporting Information
| For Use With | Constant Monitor Systems |
Documents
No Documents Found