text.skipToContent text.skipToNavigation

Multimeters

Displaying 1 - 12 of 12 products found
  • Extech Instruments 381626 Pen Multimeter, 3 - 500VAC

    ID: 381626
    Mfr ID: 381626
    The Extech 381626 is a versatile and compact 8 function pen style digital multimeter with logic test. The compact pen design is ideal for field technicians as well as bench testing and repairs on electronic equipment. Found in few DMMs, the highly useful logic testing capabilities of the Extech pen meter easily identify a high or low logic threshold level of TTL or CMOS digital circuits in electronic components. With extra fuses, test lead and alligator clip, which stows when not in use for easy storage and operating instructions.

     

  • Amprobe 30XR-A Auto Ranging Digital Multimeter, 200 mV - 600VAC/DC

    ID: 30XR-WAV
    Mfr ID: 30XR-A
    Mfr: Amprobe
    The Amprobe 30XR-A digital multimeter is a feature packed, rugged and reliable multimeter. It displays true-rms measurement on a low light backlight LCD screen. Component and logic testing is used for troubleshooting electronics at the bench or on the job site. This multimeter features auto and manual ranging for measuring current, voltage, resistance, capacitance, frequency, inductance, duty cycles, logic states and dBm function.

     

  • Fluke 175 Digital True RMS Multimeter, 0.1 mV - 1000VAC/DC

    ID: FLUKE-175
    Mfr ID: 175
    Mfr: Fluke
    The Fluke 175 True RMS digital multimeter is the baseline for professional technicians around the world. With features you need to troubleshoot and repair in electrical and electronic systems, the Fluke 175 CAT IV 600V/CAT III 1000 V digital multimeter provides accurate, True RMS readings through years of reliable service.

     

  • Fluke 83-5 Digital Industrial Handheld Multimeter, 600 mV - 1000V

    ID: FLUKE-83-5
    Mfr ID: 83-5
    Mfr: Fluke
    Fluke 83-5 digital multimeter. Large digit display with bright, two level backlight, 6000 counts, 3-3/4 digits, measures up to 1000VAC and DC, measures up to 10A, 20A for up to 30 sec, frequency to 200 kHz and % duty cycle, resistance, continuity and diode test. Min/max average recording with min/max alert to capture variations automatically, relative mode to remove test lead interference from low ohm measurements, auto and manual ranging for maximum flexibility.

     

  • Amprobe LCR55A Handheld Component Tester, 200 ohm - 20 megohm

    ID: LCR55-WAV
    Mfr ID: LCR55A
    Mfr: Amprobe
    The ultimate electronic component verifier measures inductance, capacitance, resistance, transistors, diodes and microwave diodes. Plug-in test slots and test leads with threaded alligator clips, Oversized, digital display. Data hold and max hold. "Zero Adjust" pot for ohm. Low battery indication. Auto power off.

     

  • Amprobe 34XR-A True RMS Digital Multimeter, 400 mV - 1000VAC/DC

    ID: 34XR-WAV
    Mfr ID: 34XR-A
    Mfr: Amprobe
    The Amprobe 34XR-A digital multimeter is a feature packed, rugged and reliable multimeter. It displays true-rms measurement on a low light backlight LCD screen. Component and logic testing is used for troubleshooting electronics at the bench or on the job site. This multimeter features auto and manual ranging for measuring current, voltage, resistance, capacitance, frequency, inductance, duty cycles, logic states and dBm function.

     

  • Amprobe CR50A Handheld LCR Tester, 200 pF - 20 mF

    ID: CR50-WAV
    Mfr ID: CR50A
    Mfr: Amprobe
    The CR50 are dedicated component checkers with wider ranges, better accuracy and more precise resolution than multimeters with component test features. Use the CR50 to verify, sort, match and inspect components for quality control purposes.

     

  • Fluke 87-5 Digital Industrial True RMS Handheld Multimeter, 600 mV - 1000V

    ID: FLK-87-5
    Mfr ID: 87-5
    Mfr: Fluke
    The new Fluke 87V has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electromechanical equipment. The 87V operates very similar to the classic 87, but with more problem solving power, safety, convenience and impact protection.

    In Stock

  • Fluke 116 Digital True RMS Multimeter, 6 - 600VAC/DC

    ID: FLUKE-116
    Mfr ID: 116
    Mfr: Fluke
    The Fluke 116 HVAC multimeter features temperature and micro amps measurements useful for heating, ventilation, air conditioning and refrigeration (HVAC/R) technicians. The Fluke 116 is a compact true-rms meter and has everything needed in an HVAC meter including temperature and micro amp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors. The Fluke 116 also, has dual impedance capability: incorporating both regular high impedance test capabilities and low impedance functions for detecting ghost voltages, just switch to the auto-V/LoZ (low impedance) test setting to whether measurement is a ghost voltage.

     

  • Fluke 177 Digital True RMS Multimeter, 0.1 mV - 1000VAC/DC

    ID: FLUKE-177
    Mfr ID: 177
    Mfr: Fluke
    The Fluke 177 digital multimeter gives you true-rms voltage and current measurements, 6000 count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09% basic accuracy, a digital display with analog bar graph and backlight.

     

  • Fluke 179 Digital True RMS Multimeter, 0.1 mV - 1000VAC/DC

    ID: FLUKE-179
    Mfr ID: 179
    Mfr: Fluke
    The Fluke 179 True RMS digital multimeter is the preferred solution for professional technicians around the world. With all the features you need to troubleshoot and repair in electrical and electronic systems, the Fluke 179 also offers a digital display with analog bar graph and built in temperature measurements. Fluke builds the most trusted tools in the world and that means more than just the Fluke 179. If you work with the HVAC equipment, need a small meter for small spaces or work in the electrical installer's and repairman's world, check out the full family of Fluke digital multimeters.

     

  • Fluke 787 True RMS Process meter, 0 - 1000VAC/DC

    ID: FLUKE-787
    Mfr ID: 787
    Mfr: Fluke
    The Fluke 787 Process Meter puts a complete troubleshooting solution in the palm of your hand. Get in touch with more information, faster and easier with the newest member of the Fluke 80 Series, the 787 Process Meter. The 787 gives you the measurement capabilities you expect from our rugged, reliable DMMs plus the ability to source, simulate or measure dc current with 1 uA resolution and accuracy of 0.05%. Put it all together and you have the ideal tool for troubleshooting and calibrating current loop applications. So if you're tired of always tracking down a calibrator, lugging around two tools and switching back and forth, get the single best solution for doubling your power.