text.skipToContent text.skipToNavigation

Electrical Insulating Tapes

Electrical insulating and conductive tapes, made from a broad range of backings and adhesives, to help you meet all the requirements in different applications and environments. Glass cloth, flexible and conformable, offers high temperature resistance and tensile strength, along with excellent varnish and resin absorption. Paper tapes provide good cushioning, puncture resistance and toughness, and they're ideal for use as coil cover on bobbin-wound coils. A variety of polyester tapes provide the durability and dielectric strength needed in certain insulating applications, along with cut-through and abrasion resistance. Take a look at our breadth of tape products today.

  • 1(current)
  • 2
  • 3
Displaying 1 - 21 of 286 products found
  • 3M 1076 Paper/Glass Filament Electrical Tape

    Multiple item options available
    Mfr ID: 1076-PAC
    3M electrical filament paper cored tape 1076 is made of an electrical-grade paper backing, reinforced with scrim glass filaments and an oil-compatible acrylic pressure sensitive adhesive. Unlike conventional film-backed tapes, this products paper backing construction provides for complete impregnation and saturation of the tape in adjacent layers of insulation.

     

  • 3M 1157R Vinyl Electrical Tape, 0.7" x 72 yd x 4 Mil, Transparent

    ID: 3M1157X.70
    Mfr ID: 1157X.70
    3M 1157R electrical tape is a 100% rayon fiber backing coated on one side with an acrylic pressure sensitive adhesive system for an overall caliper of 4 Mil. The porous rayon mat and adhesive are both permeable to gases and liquids.

     

  • Isovolta 1961-08 Mica Tape

    Multiple item options available
    Mfr ID: 1961-08
    Mfr: Isovolta
    Isovolta 1961-08 Mica Tape.

    In Stock

  • 3M 23 Scotch® Ethylene Propylene Rubber Premium Electrical Tape

    Multiple item options available
    Mfr ID: 23
    Scotch electrical tape 23 is a highly conformable, self-fusing ethylene propylene rubber based high-insulating voltage tape. It is without halogen, it resists in the UV and ozone and is not vulcanized. It is compatible with all the synthetic insulations cables and with the paper insulations cables with migrant material. The turns of the tape weld together in an homogeneous form after application.

     

  • Von Roll 2480XS Mica Tape

    Multiple item options available
    Mfr ID: 2480XS
    Von Roll 2480XS Series Mica Tape.

    In Stock

  • Intertape 4560 Acetate Electrical Tape

    Multiple item options available
    Mfr ID: 4560
    Intertape 4560 printable tape, with acetate cloth backing and a thermosetting rubber adhesive system offers high adhesion, conformability and excellent insulating properties. It is hand tearable and will accept varnish impregnation. Will accept varnish impregnation. Good storage stability.

     

  • Intertape 54143 Polyester Electrical Tape, 3/4" x 72 yd x 2.4 Mil, Clear

    ID: 5414300X.75
    Mfr ID: 5414300X.75
    Intertape 54143 1.4 Mil polyester backing with a thermosetting acrylic adhesive. Tape exhibits high temperature shear resistance when thermoset. Backing provides abrasion and puncture resistance and excellent insulating properties.

    In Stock

  • 3M 57 Polyester Electrical Tape

    Multiple item options available
    Mfr ID: 57
    3M 57 electrical tape is a 2 Mil transparent polyester film with rubber thermosetting adhesive. Rated for use up to 130 deg C, it withstands higher temperature conditions than tapes with acetate film backing.

     

  • Von Roll Poly Glas® 76830 Polyester Banding Tape

    Multiple item options available
    Mfr ID: 76830
    Poly Glas 76830 is an electrical grade, parallel glass banding tape, impregnated with an uncured, high temperature, modified polyester resin. During cure, resin flow fills voids and air spaces, producing a homogeneous laminate, with a smooth resin rich surface.

     

  • Von Roll 77634 Glass Cloth Mica Tape

    Multiple item options available
    Mfr ID: 77634
    Mica Mat 77634 is a low binder content mica tape is made with a thick, tightly woven glass cloth that can protect the mica during insertion and winding.

     

  • Von Roll 77997 Mica Tape

    Multiple item options available
    Mfr ID: 77997
    Von Roll 77997 Mica Tape.

     

  • Arlon 920 Mil-Spec Rectangular Fusible Tape

    Multiple item options available
    Mfr ID: 920-P1
    Arlon 920 Mil-Spec rectangular tape is of uniform thickness and is ideal for applications where a smooth, even layer of tape is not required. They bond irreversibly to provide an insulative barrier that is resistant to moisture, oxygen, ozone and corona over a wide temperature range (-65 to 500 deg F). Arlon STD silicone tapes provide superior electrical insulation with a dielectric strength of 300 VPM minimum at 356 deg F.

    In Stock

  • Western Filament Flat Polyester Surge Ring Cable

    Multiple item options available
    Mfr ID: Bandep
    Textured polyester yarn is braided into a flat, tubular construction. This dry Surge Ring encircles the end-turns and becomes a ridged, non-conductive band and/or restraining device. Ideal for the small motor repair shop or VPI systems.

     

  • Breyden Products Round Untreated Fiberglass Dry Surge Ring Rope

    Multiple item options available
    Mfr ID: BRE-UN
    Round untreated fiberglass surge rope. The material consists of glass fiber rovings encapsulated by a braided fiberglass sleeving. This surge rope is designed or dip or VPI (Vacuum Pressure Impregnation) systems.

    In Stock

  • Carolina Narrow Fabric 7 Mil Plain Woven Fiberglass Tape

    Multiple item options available
    Mfr ID: CAR164FGT-7
    7 Mil woven fiberglass tapes have a wide range of uses in the electrical equipment market: Transformers, motors, generators, switch gears, consumer appliances and electronic equipment use these tapes to insulate, seal, or strengthen their various components.

    In Stock

  • Hesgon 100% Fiberglass 15 Mil Type A Medium Weave Non-Shrinkable Tape

    Multiple item options available
    Mfr ID: GT-H-F-15-A
    Mfr: Hesgon
    Hesgon 15 Mil type A medium tapes are manufactured of 100% fiberglass yarns with a minimum amount of sizing thus allowing for good wet-out impregnation. All tapes are also available in our standard or custom finishes. In order to achieve maximum results with all the various resins available we are always striving to improve our various finishes.

     

  • Hesgon 100% Fiberglass 5 Mil Type M Non-Shrinkable Tape

    Multiple item options available
    Mfr ID: GT-H-F-5-M
    Mfr: Hesgon
    Hesgon 5 Mil type M tapes are manufactured of 100% fiberglass yarns with a minimum amount of sizing thus allowing for good wet-out impregnation. All tapes are also available in our standard or custom finishes. In order to achieve maximum results with all the various resins available we are always striving to improve our various finishes.

    In Stock

  • Arlon LevelWrap® LW401 Triangular Polyethylene Fusible Tape

    Multiple item options available
    Mfr ID: LW401
    LevelWrap LW401 has tapered edges and a colored line along its apex. The purpose of the line is to act as a guide for subsequent wraps in order to form a uniformly thick layer. They bond irreversibly to provide an insulative barrier that is resistant to moisture, oxygen, ozone and corona over a wide temperature range (-65 to 500 deg F). Arlon STD silicone tapes provide superior electrical insulation with a dielectric strength of 300 VPM minimum at 356 deg F.

     

  • Nitto P-749BN Flatback Paper Electronic Paper Tape

    Multiple item options available
    Mfr ID: P-749BN
    Mfr: Nitto
    Nitto Denko adhesive tape lineup suitable for axial taping of various components largely contribute to automation and enhanced reliability of the component with lead pins insertion process for component sizes ranging from small to large.

     

  • Fibertek Res-I-Glas Type R Banding Tape

    Multiple item options available
    Mfr ID: Res-I-Glas-R
    Mfr: Fibertek
    RES-I-GLAS Type R is superior in tensile strength, durability, insulation value, ease of application and storage shelf life, due to the uncompromised use of highest grade raw materials and consistent manufacturing process. Constructed of high tensile electrical grade glass yarns laid parallel and bonded with fully catalyzed thermosetting resins. High tensile, high modulus, low elongation, high impact strength band. Eliminates insulation and creepage problems experienced with steel wire banding. Tape is supplied semi-cured (B-Stage) in a soft well balanced flat ribbon form and this assures that each yarn bears an equal share of the load.

     

  • 3M Super 20 Epoxy Printable Electrical Tape

    Multiple item options available
    Mfr ID: Super 20
    3M epoxy film electrical tape Super 20 is a 5 Mil total thickness, high dielectric, flame retardant tape. The tape has an acrylic, pressure sensitive adhesive that has resistance to heat, oxidation, solvent and oils. The tape shall perform at a temperature of 311 deg F without loss of physical or electrical properties.

     

    • 1(current)
    • 2
    • 3