Varflex Varglas Non-Fray Type HP Flexible Uncoated Sleeving, 1/2", 100' Per Spool, Natural, MFR ID VARGHP.5NBV
MFR #:AV482413050 3130050-NAT
EIS #:VARGHP.5NBV
MFR #:AV482413050 3130050-NAT
EIS #:VARGHP.5NBV
Available to Order
Min Qty:1
|Qty Increment:1
$284.75 / 100Foot
Min Qty:1
|Qty Increment:1
- Attributes
- Features
Attributes
General Information
Item NameUncoated Sleeving
Design & Construction
ColorNatural
Performance Details
Flame RetardantYes
Physical Properties
Gauge0.5 Inch
Inside Diameter0.5 Inch
Length100 ft
Features
- Binders are applied to further retard fraying and to hold sleeving round for cutting
- 2.55-2.58 g/cu.cm specific gravity
- Good resistance to most alkalies, resistance to acids is fair
- Effect of bleaches and solvents are unaffected
- Excellent resistance to sunlight and aging, not attacked by mildew
- 6.5-6.8 at 22 °C, 60 Hz dielctric constant
- 0.001-0.005 at 22 °C, 1MHz dissipation factor
- Up to 316 °C indefinitely, up to 616 °C for shorter periods thermal endurance
- -60 °C per UL 1441 cold bend
- Passes UL 1441 (VW-1) flame resistance, will not burn
- Types HO, HP and HM are available in a variety of colors which may be less vivid after exposure to 150 °C
- All four types are available in various wall thicknesses, since there is no impregnant that will provide dielectric protection at those extremes, these sleevings require heavy or multiple-wall thicknesses if used as primary insulation
- Volume Resistivity: 10^15 -10^16 Ohm-cm
- Dielectric Strength: 1100 - 1500V
- Temperature Rating: -60 to 16 °C
- Tensile Strength: 500000 - 550000 psi
- Length: 100 ft Per Spool