Elantas PDG Sterling® E069 Single-Component Thixotropic Epoxy Resin, 500 lb/55 gal
MFR #:117647
EIS #:PDGE069DRUM
MFR #:117647
EIS #:PDGE069DRUM
Out of Stock
Min Qty:1
|Qty Increment:1
$38.14 / US pound
Min Qty:1
|Qty Increment:1
- Attributes
- Features
Attributes
General Information
Item NameThixotropic Epoxy Resin
Physical Properties
Container Size500 lb
Container TypeDrum
Features
- High build
- Low run-off
- Fiber-reinforced for toughness and thermal shock resistance
- Chemical and moisture resistant
- No catalyst required
- Vacuum-pressure impregnation application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 0.005 at 1 kHz - 25 °C/77 °F and 1 kHz - 50 °C/77 °F, 0.02 at 1 kHz - 100 °C/212 °F, 0.99 at 1 kHz - 150 °C/302 °F dissipation factor
- 3.0 at 1 kHz - 25 °C/77 °F and 1 kHz - 50 °C/77 °F, 3.2 at 1 kHz - 100 °C/212 °F, 4.7 at at 1 kHz - 150 °C/302 °F dielectric constant
- 1.3 x 10^16 Ohm-cm at 25 °C/77 °F volume resistivity
- 10 - 13 Mils film build
- 81 Pounds at 25 °C/77 °F, 14 Pounds at 150 °C/302 °F helical coil bond strength (ASTM D2519 over MW 35)
- Secondary insulation
- Gel Time: 12 - 17 min at 150 °C/302 °F
- Dielectric Strength: 1350 V/Mil (ASTM D149), 1000 V/Mil (ASTM D149 After 24 hr in Water )
- Flash Point: >94 °C (ASTM D93)
- Viscosity: 25000 - 55000 CP at 25 °C/77 °F, 2 rpm, 6500 - 11000 CP at 25 °C/77 °F, 20 rpm
- Density: 1.2000 g/cm3 (77 °F (25 °C))
- Gel Time: 12 - 17 min
- Viscosity: 25000 - 55000 cP
- Container Size: 500 lb/55 gal