Elantas PDG Elan-Tron® E8162 Two-Component Thixotropic Dip Coat Resin, 8 lb/1 gal, Opaque White
MFR #:ETRONE8162G
EIS #:ETRONE8162G
MFR #:ETRONE8162G
EIS #:ETRONE8162G
Out of Stock
Min Qty:1
|Qty Increment:1
WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Elantas PDG Elan-Tron® E8162 Two-Component Thixotropic Dip Coat Resin, 1.3452 g/cm3 (77 °F (25 °C)) Density, >94 °C (ASTM D93) Flash Point, 3 hr At 65 °C/150 °F or 1 hr At 85 °C/185 °C Full Cure Time, 80 - 85 Shore D Hardness, 100 (Parts By Weight) Mixing Ratio, Greater Than 22 mm2/s (104 °F (40 °C)) Kinematic Viscosity. - ELAN-Tron® E 8162 white is a two-component, heat-cured, epoxy system.
$417.14 / Kit
Buy In Bulk & Save
| 1-12 | $417.14 / 1 Kit |
| 13-24 | $351.28 / 1 Kit |
| 25+ | $303.37 / 1 Kit |
Buy In Bulk & Save
| 1-12 | $417.14 / 1 Kit |
| 13-24 | $351.28 / 1 Kit |
| 25+ | $303.37 / 1 Kit |
Min Qty:1
|Qty Increment:1
WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Elantas PDG Elan-Tron® E8162 Two-Component Thixotropic Dip Coat Resin, 1.3452 g/cm3 (77 °F (25 °C)) Density, >94 °C (ASTM D93) Flash Point, 3 hr At 65 °C/150 °F or 1 hr At 85 °C/185 °C Full Cure Time, 80 - 85 Shore D Hardness, 100 (Parts By Weight) Mixing Ratio, Greater Than 22 mm2/s (104 °F (40 °C)) Kinematic Viscosity. - ELAN-Tron® E 8162 white is a two-component, heat-cured, epoxy system.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameThixotropic Dip Coat Resin
Trade NameElan-Tron®
SeriesElan-Tron® E8162
General Features
Net Weight11.0 - 11.4 lb/gal
Shelf Life12 Months
TypeTwo-Component
Design & Construction
ColorOpaque White
FormLiquid
Performance Details
Full Cure Time3 hr at 65 °C/150 °F or 1 hr at 85 °C/185 °C
Technical Details
Flash Point94 °C
Chemical Properties
Mixing Ratio100 (Parts By Weight)
Physical Properties
Container Size8 lb
Hardness80 - 85 Shore D
Features
- Excellent chemical and moisture resistance
- Resistant to thermal shock
- Thixotropic for high build
- Low runoff during cure
- Pass 10 cycles at - 55 to 130 °C thermal shock
- Dip coat, curtain coat, screen print, roller coat application methods
- Container Size: 8 lb/1 gal
- Flash Point: >94 °C (ASTM D93)
- Viscosity: Greater Than 22 mm2/s/104 °F/40 °C) Kinematic
- Density: 1.3452 g/cm3 (77 °F (25 °C))
Applications
- Dip Coat for Electronic Devices to Provide Environmental and Mechanical Protection