EIS

Would you like to sign up for deals, discounts, and other important updates from EIS? Sign up

home
0
{0} items in cart
September Shop & Earn
0
0

Elantas PDG Sterling® E400 Two-Component Thermopoxy Epoxy Resin Motor Sealer, 12 lb/1 gal

The image shown is representative of the product family and may not specifically be the individual item.
The image shown is representative of the product family and may not specifically be the individual item.
The image shown is representative of the product family and may not specifically be the individual item.

MFR #:PDGE400G

EIS #:PDGE400G

MFR #:PDGE400G

EIS #:PDGE400G

In Stock

Min Qty:1

  |  

Qty Increment:1

WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
0
0
Elantas PDG Sterling® E400 Two-Component Thermopoxy Epoxy Resin Motor Sealer, Epoxy Base Type, Room Temperature Cure Type, 1.6170 g/cm3 (77 °F (25 °C)) Density, 300 V/Mil (ASTM D149-125 Mil) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 4 - 8 hr At 25 °C/77 °F Full Cure Time, 15 - 25 min At 25 °C/77 °F (250 g) Gel Time, 82 Shore D (ASTM D2240) Hardness, 100 (Parts By Weight And Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener Mixing Ratio, 50000 - 100000 CP At 25 °C/77 °F Viscosity, 400 - 800 CP At 25 °C/77 °F Viscosity - Part-B. - Sterling® E 400/C 12 hardener is a two-component, room temperature curing, 100%- solids resin system.
$19.97 / US pound

Min Qty:1

  |  

Qty Increment:1

WARNING: California Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
0
0
Elantas PDG Sterling® E400 Two-Component Thermopoxy Epoxy Resin Motor Sealer, Epoxy Base Type, Room Temperature Cure Type, 1.6170 g/cm3 (77 °F (25 °C)) Density, 300 V/Mil (ASTM D149-125 Mil) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 4 - 8 hr At 25 °C/77 °F Full Cure Time, 15 - 25 min At 25 °C/77 °F (250 g) Gel Time, 82 Shore D (ASTM D2240) Hardness, 100 (Parts By Weight And Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener Mixing Ratio, 50000 - 100000 CP At 25 °C/77 °F Viscosity, 400 - 800 CP At 25 °C/77 °F Viscosity - Part-B. - Sterling® E 400/C 12 hardener is a two-component, room temperature curing, 100%- solids resin system.

Attributes

General Information
Item NameThermopoxy Epoxy Resin Motor Sealer
Trade NameSterling®
SeriesSterling® E400
General Features
Net Weight13.3 - 13.7 lb/gal
Shelf Life12 Months
TypeTwo-Component
Design & Construction
Base TypeEpoxy
Cure TypeRoom Temperature
FormLiquid
Performance Details
Full Cure Time4 - 8 hr at 25 °C/77 °F
Gel Time15 min
Technical Details
Flash Point94 °C
Chemical Properties
Mixing Ratio100 (Parts By Weight and Volume) Resin, 12.5 (Parts By Weight) 19.5 (Parts By Volume) Hardener
Viscosity50000 cP
Viscosity - Part-B400 cP
Electrical Properties
Dielectric Strength300 V/Mil
Physical Properties
Container Size12 lb
Hardness82 Shore D (ASTM D2240)