Zestron 0320-0005 Vigon Stencil Cleaner, 5L Jerry Can, Clear
MFR #:0320-0005
EIS #:0320-0005-ZES
MFR #:0320-0005
EIS #:0320-0005-ZES
Low Stock
Min Qty:1
|Qty Increment:1
The MPC cleaner reliably removes solder pastes and SMT adhesives from SMT stencils and can also be used in SMT printers for underside wiping and misprinted assemblies. Depending on the type of fluxes, VIGON SC 200 can also be used for misprints on double-sided PCBAs with one side already soldered. The cleaning agent is designed for the use in spray-in-air and ultrasonic cleaning systems.
$113.14 / Can
Min Qty:1
|Qty Increment:1
The MPC cleaner reliably removes solder pastes and SMT adhesives from SMT stencils and can also be used in SMT printers for underside wiping and misprinted assemblies. Depending on the type of fluxes, VIGON SC 200 can also be used for misprints on double-sided PCBAs with one side already soldered. The cleaning agent is designed for the use in spray-in-air and ultrasonic cleaning systems.
- Attributes
- Features
- Applications
Attributes
General Information
Item NameStencil Cleaner
Trade NameVigon
SeriesSC 200
General Features
TypeWater-based stencil cleaner
StandardsIPC-7526 Manual for cleaning of stencils and misprinted boards
Net Weight5 L
Shelf LifeMinimum 5 years in factory sealed containers
Storage Temperature5 to 30 C
Design & Construction
Base TypeWater-based
ColorClear
FormLiquid
Application MaterialsStencils, SMT printer components, misprinted boards
Performance Details
RemovesSolder pastes and SMT adhesives in one single process and can also be used for stencil underside wiping in printers
Vapor Pressure18.1 mbar at 20 C
Technical Details
Boiling Point95 to 212 C
Flash PointNone until boiling
Chemical Properties
DilutionRTU
pH RatingNeutral
Specific Gravity0.99 g/mL at 20 C
Physical Properties
Container Size5 L
Container TypeJerry Can
Density0.99 g/mL at 20 C
Odor/ScentLow Odor
Environmental Condition
Temperature Rating20 to 50 C
Supporting Information
Use WithSpray-in-air systems, ultrasonic tanks, SMT printers
Solubility In WaterSoluble
Features
- High bath loading capability, very good filterability and therefore a long bath life as well as low maintenance costs
- Due to its mild formulation, the medium shows excellent material compatibility with stencils
- Applicable in spray-in-air systems, ultrasonic dip tanks and printers
- Recommended for ambient cleaning temperatures
- Water-based cleaner without flash point, no explosion-proof protection required
- Applicable in closed-loop systems
- No foaming when used in spray-in-air systems, low odor, no building of organics in the rinsing section
- VIGON SC 200 has been approved by leading international manufacturers for the use in their stencil printers
Applications
- Stencil and Misprint Cleaning (removal of solder pastes and SMT adhesives, stencil underside wiping, misprints on PCBAs)